講演抄録/キーワード |
講演名 |
2005-11-11 17:15
正弦波電圧検出を使わない力率改善制御回路 ○森田浩一(オフィス・モリタ) |
抄録 |
(和) |
高調波規制は法制化され採用された国も多くなってきたため、75W以上の電子機器の電源では力率改善回路が殆ど機器で採用されるようになってきた。力率改善回路の制御回路は、いろいろな回路方式が提案されているが、大電力の力率改善回路では電流連続モード(CCM Current Continuation Mode)がもっぱら使われている。しかしこの電流連続モードは、入力電流を正弦波にするために、入力電圧によって基準正弦波を作りこの基準正弦波の電圧と入力電流とを比較して正弦波になるように制御し無ければならなかった。しかし本論文では、入力電圧を検出することなく入力電流を正弦波にすることができる新しい方法を提案する。これによって力率改善回路の部品も少なくすることができ電圧検出に要する抵抗類のロスも減少でき高効率で安価な力率改善回路の制御回路を実現した報告である。 |
(英) |
As the limits for harmonic current emission was enshrined into law and many countries started to adopt it. So with the power supply of the electrical and electric equipment under 75 watts, power factor correction has been adopted for various equipments. The control circuit of the power factor correction has various suggestions of numerous current modes; however, inductor current continuation mode has mainly been utilized. However, this inductor current continuation mode changes the input current into sine wave. Therefore, sine wave reference has to be created depending on the input voltage and it has to be controlled and compare the voltage of the sine wave reference with input current to keep it sine wave. However, on this paper, a new method of changing input current into sine wave without defecting input voltage is suggested. This enables to decrease the parts of power factor correction, decrease the loss of the resister required for a voltage detector, and realize the effective and reasonable control circuit of power factor correction.
Keyword- Power Factor Corrective Circuit、 voltage detector Sine-wave reference voltage ,multiplyer |
キーワード |
(和) |
力率改善回路 / 入力電圧検出 / 正弦波基準電圧 / 乗算器 / / / / |
(英) |
Power Factor Corrective Circuit / Voltage detector / Sine-wave reference voltage / multiplyer / / / / |
文献情報 |
信学技報, vol. 105, no. 391, EE2005-46, pp. 43-46, 2005年11月. |
資料番号 |
EE2005-46 |
発行日 |
2005-11-04 (EE) |
ISSN |
Print edition: ISSN 0913-5685 |
PDFダウンロード |
|