講演抄録/キーワード |
講演名 |
2009-04-09 14:50
等価壁厚量を補正した金属壁モデルによるポスト壁導波路T分岐のモーメント法解析 ○橋本 紘・広川二郎・安藤 真(東工大) AP2009-9 |
抄録 |
(和) |
ポスト壁導波路の解析では計算を高速化するためにポスト壁を,管内波長が等しくなる等価的な金属壁で置き換えている.この置換法は直線状の導波路に対しては有効だが,分岐や角のような不連続を持つ構造では誤差を生じる.平行平板スロットアレー用給電導波路を構成するT分岐の設計においても,等価金属壁モデルはポスト形状を考慮した解析に対して誤差を持つことを確認している.T分岐の不連続部である結合窓周辺に仮定する等価金属壁を見直し,ポスト壁導波路T分岐に対するより正確な近似モデルを提案した. |
(英) |
In analyses of post-wall waveguides, the post-walls are replaced by perfect electric conductor (PEC) walls which give the same guide wavelength of the post-wall waveguides in order to make the computation time short. This replacement works well for straight waveguides, but it has some errors for structures which have discontinuity such as junctions and corners. The authors have confirmed that the conventional PEC solid wall model has errors for the design of post-wall T-junctions. In this paper, the equivalent wall thickness of the PEC wall around the coupling windows is improved. A novel analysis model which gives good approximation of a post-wall waveguide T-junction is presented. |
キーワード |
(和) |
ポスト壁導波路 / 平行平板スロットアレー / T分岐 / 等価壁厚量 / / / / |
(英) |
Post-wall waveguide / Parallel plate slot array / T-junction / Equivalent wall thickness / / / / |
文献情報 |
信学技報, vol. 109, no. 1, AP2009-9, pp. 49-53, 2009年4月. |
資料番号 |
AP2009-9 |
発行日 |
2009-04-02 (AP) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
AP2009-9 |