講演抄録/キーワード |
講演名 |
2011-11-24 17:45
複数視点による同時撮像を行う高速書籍電子化システムのための三次元変形推定と展開画像合成 ○糸山浩太郎・山田雅宏・渡辺義浩・石川正俊(東大) PRMU2011-112 |
抄録 |
(和) |
近年,高速かつ高精細な書籍電子化技術の需要が高まってきている.このような技術の実現において,複数台のカメラを配置して書籍を捉え,異なる視点の画像を統合することで高精細化を図る手法が有効であると考えられる.しかし,書籍の紙面は平坦でないと同時に,画像の解像度が高い.このため,紙面の変形による書籍画像の歪みを補正するとともに,画像間の統合を正確に行うためには高い精度が要求される.さらに,我々は,めくり動作中の書籍に対して複数視点による高速・高精細電子化を行うことを目的としている.このような背景のもと,本稿では,複数台の高速カメラを互いの撮影領域がほとんど重複しないように配置したシステム構成において,めくり動作中の書籍の高精度な三次元変形推定と高精細な書籍画像補正の両立を図る手法を提案する.実験の結果,4視点の画像がずれなく統合され,解像度2倍程度の書籍画像を取得できることを確認した. |
(英) |
Digitization of documents recently has become an important technology. In order to meet this demand, it is promising technique to observe the document by multiple cameras and integrate those different-view images. However, the high-accuracy integration is required because the paper of the document is not flat and the image resolution is high. In addition, in our research, we target the goal to scan large stack of paper while the continuous page flipping action and digitize all of the pages at high speed and high definition. Based on this background, this paper proposes a method to achieve the high-accuracy three-dimensional deformation estimation and high-definition correction of the distorted document image for the system configuration in which multiple high-speed cameras are arranged with small overlapped captured areas. The experimental result shows the corrected document image from the 4-different views. |
キーワード |
(和) |
電子書籍化 / 高速カメラ / 多視点 / 可展面 / 形状テンソル / / / |
(英) |
Book Digitization / High-speed Camera / Multi-view Imaging / Developable Surface / Shape Tensor / / / |
文献情報 |
信学技報, vol. 111, no. 317, PRMU2011-112, pp. 75-80, 2011年11月. |
資料番号 |
PRMU2011-112 |
発行日 |
2011-11-17 (PRMU) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
PRMU2011-112 |