講演抄録/キーワード |
講演名 |
2018-11-20 10:25
縮退分離六角形断面導波管円偏波放射開口アンテナの不要共振除去設計 ○和井秀樹・戸村 崇・広川二郎(東工大) AP2018-102 |
抄録 |
(和) |
これまでにミリ波帯の高効率・広帯域アンテナとして積層薄板拡散接合による二層構造並列給電導波管スロットアレーが試作されている. 円偏波放射部は以前HFSSによる設計で設計されていたが, モーメント法による高速解析手法を提案し, Genetic Algorithm で2x2 素子サブアレーを広帯域設計した.反射-14dB 以下かつ軸比3dB 以下の帯域幅が4.8%から14.5%になった. しかし, 設計帯域(57-66GHz)内の61.18GHz 付近で局所的に利得が低下していた. 本報告では, この原因が放射開口を有するキャビティでのTM111モード共振と結合し, 放射開口でTM11モードが励振されるためと解明した. 利得低下を帯域内で起こさないように帯域外へ共振周波数を移動させて設計する方法を提案した. その結果, 共振周波数を設計帯域外(66.3GHz)へと移し, かつ軸比特性の劣化を設計帯域で3.35dB以下に抑えられた. |
(英) |
The corporate-feed waveguide slot array antenna is a high-efficiency and wide-band antenna in the millimeter-wave band. A circular-polarization radiating part for this antenna was designed by HFSS previously. The authors proposed a fast analysis method for the radiating part by the method for moments, and a design with Genetic Algorithm. The design of the 2x2-element sub-array was improved to 14.6% bandwidth for reflection less than -14dB and axial ratio lower than 3 dB. However, the directivity gain of this radiating part locally was decreased around 61.18GHz in the designed band (57-66GHz). In this paper, the authors find the reason that the incident wave couples with TM111-mode resonance in a cavity with the radiating aperture and TM11-mode is excited on the radiating aperture at 61.18GHz. The authors propose the design method to shift the resonant frequency out of the band in order without reducing the directivity of this radiating part. The axial ratio is suppressed below 3.35dB in the band. |
キーワード |
(和) |
円偏波 / 不要共振 / 導波管スロットアレーアンテナ / ミリ波帯 / 60GHz帯 / 並列給電 / アレーアンテナ / |
(英) |
circular-polarization / undesired-resonance / waveguide slot array antenna / millimeter wave band / 60GHz-band / cooperate-feed / array antenna / |
文献情報 |
信学技報, vol. 118, no. 310, AP2018-102, pp. 5-8, 2018年11月. |
資料番号 |
AP2018-102 |
発行日 |
2018-11-13 (AP) |
ISSN |
Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
AP2018-102 |
|