講演抄録/キーワード |
講演名 |
2019-04-15 15:25
同軸型熱音響システムにおけるPM追加による共鳴モード制御についての検討 ○大西 陸(同志社大)・坂本眞一(滋賀県立大)・川島裕斗・白木一希・黒木大地・渡辺好章(同志社大) US2019-5 |
抄録 |
(和) |
熱音響システムは,工場排熱等を駆動源とすることができるため,近年問題となっている環境問題を解決できる可能性を持つ.当研究グループでは同軸型熱音響システム(同軸型)についての研究を行っている.同軸型はエネルギー変換の効率が高い進行波位相でのエネルギー変換が可能であり,直線形状のためループ管型と比べ小型化に有利であると考えられる.先行研究では,同軸型の冷却能力向上を目的とし,プライムムーバ(PM)の設置位置を変更した.PM設置位置を管端に近づけるにつれ冷却能力が向上することが確認されたが,ある位置以降のPM設置位置では基本モードから二次モードに共鳴が移行するために冷却能力が低下することが示唆された. 本報告では一般的に発振開始温度低下の手法として用いられるPMを複数設置する方法を用い,二次モードが励振しにくい設置位置に追加のPMを設置した.これにより二次モードの発生が抑制され,基本モードの音圧が上昇することが確認された. |
(英) |
Thermoacoustic systems have the potential to solve environmental issues, which have become a problem in recent years, because they can be driven by waste heat. The present group is studying the coaxial type thermoacoustic system (coaxial type). The coaxial type is capable of energy conversion at traveling wave phase, where the efficiency is high, and has advantage for miniaturization compared to the loop tube type because of the linear shape. In the previous research, the installation position of the prime mover (PM) was changed in order to improve the cooling capacity. It was confirmed that the cooling capacity was improved by the installation position of PM, but it was suggested that the cooling capacity was lowered because the resonance shifted from the fundamental mode to the secondary mode when the installation position of PM approached the pipe end. In this study, installing additional PM where the secondary mode is difficult to excite, it was confirmed that the secondary mode decreased and the sound pressure in the fundamental mode increased. |
キーワード |
(和) |
熱音響現象 / 同軸型システム / 音圧分布 / 共鳴モード / / / / |
(英) |
Thermoacoustic phenomenon / Coaxial system / Sound pressure distribution / Resonance mode / / / / |
文献情報 |
信学技報, vol. 119, no. 3, US2019-5, pp. 21-26, 2019年4月. |
資料番号 |
US2019-5 |
発行日 |
2019-04-08 (US) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
US2019-5 |