講演抄録/キーワード |
講演名 |
2020-02-28 14:00
高柔軟性超音波探触子の受信波形評価と超音波伝搬解析 ○田中雄介・吉田光良・高根泰幸・星野秀和・小倉幸夫(ジャパンプローブ) US2019-102 |
抄録 |
(和) |
曲面から超音波計測を行うことができる柔軟性超音波探触子は振動子部分が変形するため、受信波形の評価が平面超音波探触子と同じにならない。例えば凸面から超音波探傷を行う場合は振動面が凹面の集束超音波探触子に近くなり、焦点が発生する。超音波探傷ではきずの位置が焦点位置にあるとは限らず、受信波形の振幅や周波数が変化することがある。今回柔軟超音波探触子計測の第1報として、探傷面が球状で内部に人工欠陥を配置した試験体を作成し、基礎的な受信波形計測として高柔軟性超音波探触子による探傷波形を確認した。また、シミュレーションにより超音波伝搬を確認し、振動面が変形した音源から欠陥への超音波伝搬と人工欠陥からの受信波形を調べた。 |
(英) |
Since the vibrator portion of a flexible ultrasonic probe capable of performing ultrasonic measurement from a curved surface is deformed, the evaluation of a received waveform is not the same as that of a planar ultrasonic probe. For example, when performing ultrasonic flaw detection from a convex surface, the vibrating surface is close to a focused ultrasonic probe having a concave surface, and a focus is generated. In ultrasonic flaw detection, the position of the flaw is not always at the focal position, and the amplitude and frequency of the received waveform may change. As the first report of the flexible ultrasonic probe measurement, a test specimen with a spherical flaw detection surface and an artificial defect arranged inside was created, and the flaw detection waveform with a highly flexible ultrasonic probe was used as a basic measurement of the received waveform. It was confirmed. In addition, the propagation of ultrasonic waves was confirmed by simulation, and the propagation of ultrasonic waves from a sound source whose vibrating surface was deformed to the defect and the received waveform from the artificial defect were examined. |
キーワード |
(和) |
超音波 / 探触子 / 高柔軟性 / 受信波形 / 伝搬時間差 / / / |
(英) |
Ultrasonic / Probe / High flexibility / Receiving waveform / Propagation time difference / / / |
文献情報 |
信学技報, vol. 119, no. 430, US2019-102, pp. 19-23, 2020年2月. |
資料番号 |
US2019-102 |
発行日 |
2020-02-21 (US) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
US2019-102 |
|