講演抄録/キーワード |
講演名 |
2021-05-20 13:30
短ミリ波帯PTFE基板集積導波管バトラーマトリクスの試作・評価 ○岸原充佳(岡山県立大)・藤谷海斗・山口明啓・内海裕一・太田 勲(兵庫県立大) MW2021-6 エレソ技報アーカイブへのリンク: MW2021-6 |
抄録 |
(和) |
放射光直接エッチングによりPTFEの直接加工を行い,表面に金属膜を付加することでPTFE基板集積導波管を形成するプロセスに基づき,短ミリ波帯4×4バトラーマトリクスを試作した結果について報告している.まず,方形スルーホールを用いたPTFE基板集積導波管の寸法を決定し,文献の十字交差形90°ハイブリッドおよび横断回路をPTFE基板集積導波管で接続してバトラーマトリクスを設計している.PTFEの放射光直接エッチング,金のスパッタと電解めっきを組み合わせた製作プロセスで試作を行い,放射パターンを測定することで本構造の有効性を確認している. |
(英) |
This paper attempts to fabricate and evaluate a 4×4 Butler matrix for short millimeter-wave, based on the fabrication process of the PTFE substrate integrated waveguide using the SR direct etching of PTFE and addition of metal film by sputtering. First, the dimensions of the PTFE substrate integrated waveguide using square through-holes are determined, and the cruciform 90 ° hybrid coupler and the intersection circuit are connected by the PTFE substrate integrated waveguide to design the Butler matrix. A trial fabrication is performed by the SR direct etching of PTFE and the sputtering and electroplating of Au. The validity of the proposed structure is verified by measuring the radiation pattern. |
キーワード |
(和) |
ミリ波 / 導波管 / 放射光エッチング / 方向性結合器 / バトラーマトリクス / / / |
(英) |
Millimeter-wave / Waveguide / SR etching / Directional coupler / Butler matrix / / / |
文献情報 |
信学技報, vol. 121, no. 31, MW2021-6, pp. 5-10, 2021年5月. |
資料番号 |
MW2021-6 |
発行日 |
2021-05-13 (MW) |
ISSN |
Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
MW2021-6 エレソ技報アーカイブへのリンク: MW2021-6 |