講演抄録/キーワード |
講演名 |
2022-11-10 09:20
導電性塗料を塗布した樹脂製縮小モデルのレーダ散乱断面積測定 ○渡邉卓磨(FSI)・赤嶺賢彦(東工大) SANE2022-50 |
抄録 |
(和) |
レーダ散乱断面積(Radar Cross-Section: RCS)はレーダ目標の散乱を特徴づける指標であり,近年は民生分野においてもレーダによるセンシング技術が用いられることから,その測定の重要性が増している.RCSの評価においては,各種の数値電磁界解析によるシミュレーションと,実際の測定物に電波を照射するRCS測定が行われる.しかしながら,例えば航空機の形状設計の段階など,実際の測定物が利用できない場合もある.本稿では次の二つの事項について検討する.第一に,樹脂製のモデルに導電性塗料を塗布することで,完全な金属製と同等のRCS測定が行えるかを検証する.第二に,あるモデルのRCSを縮小モデルのRCS測定により模擬可能かを検証する.これらにより,小型かつ低コストな樹脂製のモデルで実規模の金属モデルのRCS測定が実現可能なことを示す. |
(英) |
Radar cross-section (RCS) is an essential quantity in characterizing a target to be measured using radar systems. As radar sensing technologies are widely utilized commercially, RCS measurement demands are expected to increase substantially. RCS evaluation of a target requires numerical electromagnetic simulation and measurement of the object of interest. However, for designing a low-RCS product where the final product is unavailable, a test model must be employed to evaluate the effectiveness of the shape design in terms of RCS reduction. In this study, we determine and compare the RCS of a metallic and resin-made test model coated with conductive paste to demonstrate that a cost effective resin-made model can be used as a substitute for a metallic model. Moreover, we demonstrate that a miniature model can be used to evaluate the RCS of a large-scale model to further reduce the manufacturing cost of an RCS test model. |
キーワード |
(和) |
レーダ散乱断面積 / 近傍界遠方界変換 / 周波数スケーリング / 導電性塗料 / 縮小モデル / 樹脂製モデル / / |
(英) |
Radar Cross-section / Near-field-to-far-field Transformation / Frequency Scaling / Conductive Paste / Scaled Model / Resin-made Model / / |
文献情報 |
信学技報, vol. 122, no. 248, SANE2022-50, pp. 1-6, 2022年11月. |
資料番号 |
SANE2022-50 |
発行日 |
2022-11-03 (SANE) |
ISSN |
Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
SANE2022-50 |