講演抄録/キーワード |
講演名 |
2023-11-10 10:45
3Dプリンタで作製可能な300 GHz帯直線-円偏波変換素子の試作 ○廣川昌之介・浅川澄人(都立産技高専)・下川床 聖・須原理彦(都立大) EMT2023-73 |
抄録 |
(和) |
近年,無線通信において現在商用利用されていない300 GHz以上の周波数であるテラヘルツ帯を利用することが期待されている.テラヘルツ帯の無線通信を移動端末で実現するためには小型のテラヘルツ送受信デバイスが求められる.しかし送受信デバイスの相対角度が一定ではないため偏波効率の低減が無視できない.これを解決するために,ここでは光造形3Dプリンタで作製可能なテラヘルツ帯直線-円偏波変換素子(LCPC)を提案し,電磁界シミュレータによる理論解析と,得られた形状で作製・実測定することで,LCPCの実現可能性を明らかにすることを目的とした.その結果,電磁界シミュレータでは縦楕円偏波を観測することができた.実際に測定した結果は45°付近に長軸がある斜め楕円偏波となった.以上のことから長軸が異なるものの,提案デバイスによって直線偏波を楕円偏波に変換できることが分かった. |
(英) |
In recently, the terahertz band (frequencies above 300 GHz), which is currently not in commercial use, is expected to be utilized in wireless communications. In order to realize terahertz-band wireless communications in mobile devices, compact terahertz transmitter/receiver devices are required. However, since the relative angles between transmitters and receivers are not constant, the reduction in polarization efficiency cannot be ignored. To solve this problem, we propose a linear-circular polarization converter (LCPC) in terahertz-band that can be fabricated using an optical 3D printer. The purpose of this study is to clarify the feasibility of the LCPC through theoretical analysis using an electromagnetic simulator and fabrication and measurement of the obtained shape. As a result, longitudinal elliptical polarization was observed by the electromagnetic field simulator. The actual measurement results showed oblique elliptical polarization with the major axis around 45°. The results show that the proposed device can convert linearly polarized waves into elliptically polarized waves, although the long axes are different. |
キーワード |
(和) |
テラヘルツ / 円偏波 / 3Dプリンタ / 偏波変換 / / / / |
(英) |
Terahertz / Circular polarization / 3D printer / Polarization conversion / / / / |
文献情報 |
信学技報, vol. 123, no. 251, EMT2023-73, pp. 58-63, 2023年11月. |
資料番号 |
EMT2023-73 |
発行日 |
2023-11-02 (EMT) |
ISSN |
Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
EMT2023-73 |