11月16日(土) 午前
08:15 - 11:40 |
| |
08:15-08:20 |
開会挨拶 （ 5分 ） |
| (1) |
08:20-08:35 |
Contact corrosion of Ag-Mo electrical contact material |
○Yusheng Cui・Yali Wang・Cao Ling・Lifu Hu（Metalor Technologies (Suzhou)）・Christine Bourda（Metalor Technologies France）・Chi Leung（Metalor Technologies Americas） |
| (2) |
08:35-08:50 |
Influence of Different Microstructures on Electrical Behavior of The AgWC Contact Material |
○Zhenyang Song・Xiufang Zhang・Xiaoping Bai・Wei Weng（Fuda Alloy Materials） |
| (3) |
08:50-09:05 |
Preparation of WC@SnO2Core-shell Composite and Its Application in AgSnO2Contact Material |
○Qiu Jianmei・Shen Qianhong・Zhang Lingjie・Yang Hui（Zhejiang Univ.）・Fan Xianping（Wenzhou Hongfeng Electrical Alloy）・Chen Lesheng（Zhejiang Univ.） |
| (4) |
09:05-09:20 |
Simulation and analysis of temperature field and thermal stress of composite contacts in electrical life test of DC relay |
○Wenying Yang・Dongyuan Li（Harbin Inst. of Tech.）・Zhuanke Chen（Chugai USA）・Guofu Zhai（Harbin Inst. of Tech.） |
| |
09:20-09:30 |
休憩 （ 10分 ） |
| (5) |
09:30-09:45 |
An Evaluating Method for Fundamental Dynamical Parameters of Objects on a Printed Circuit Board
-- Properties of the Responses using Rectangular Wave and Sinusoidal one as an Input -- |
○Shin-ichi Wada・Keiji Koshida・Hiroaki Kubota（TMC System）・Koichiro Sawa（Nippon Inst. of Tech.） |
| (6) |
09:45-10:00 |
An Evaluating Method for Fundamental Dynamical Parameters of Objects on a Printed Circuit Board
-- Natural Frequency and Damping Ratio (2) -- |
○Shin-ichi Wada・Keiji Koshida・Hiroaki Kubota（TMC System）・Koichiro Sawa（Nippon Inst. of Tech.） |
| (7) |
10:00-10:15 |
Synchronous Control System for Synthetic Test |
○Jiang Yuan・Wu Jianwen・Wang Hefei（Beihang Univ.） |
| (8) |
10:15-10:30 |
Analysis of the let-through current capability of PCB |
○Shutong Hu・Feng Chong・Xingwen Li（Xi'an Jiaotong Univ.）・Chengzhang Han・Yongfa zhu（Huawei Technologies） |
| (9) |
10:30-10:45 |
Investigation of Noise Interference due to Connector Contact Failure in a Coaxial Cable |
○Yu-ichi Hayashi・Takaaki Mizuki・Hideaki Sone（Tohoku Univ.） |
| |
10:45-10:55 |
休憩 （ 10分 ） |
| (10) |
10:55-11:10 |
Study on the Breaking Characteristics of Low Voltage DC Circuit Breaker in the Low-current Situation |
○Yunfeng Wang・Xingwen Li・Degui Chen（Xi'an Jiaotong Univ.）・Hongwu Liu・Ruiliang Guan（Changshu Switchgear MFG.） |
| (11) |
11:10-11:25 |
Dynamic Simulation and Experiment on Electromagnetic Repulsion Mechanism for Hybrid DC Circuit Breaker |
Lin Xin・○Cao Chen（Shenyang Univ. of Tech.） |
| (12) |
11:25-11:40 |
Based On Intrinsic Mode Function Energy Tracking Method Of Circuit Breaker Vibration Signal Feature Extraction Studies |
○Sun Yihang・Wu Jianwen（Beihang Univ.） |
11月16日(土) 午後
13:00 - 16:55 |
| (13) |
13:00-13:15 |
Multi-physics Coupling Simulation in the Design of Thermal Overload Relay |
○Xun Shao・Weihua Wang・Xianping Yuan（Schneider Electric） |
| (14) |
13:15-13:30 |
A novel method of bypass protection circuit for relay's arc-suppression |
Xinjun Liu・Jing Wang・○Wenjia Zhang・Dongsheng Jiang（Beijing Inst. of Space System Engineering） |
| (15) |
13:30-13:45 |
The study for contact life of spacecraft relay under inrush current affect |
○Jiang Dongsheng・Zhang Pei・Liu Xinjun（Beijing Inst. of Space System Engineering） |
| (16) |
13:45-14:00 |
Suppression of Arc Ignition for a DC Current Fuse Using a Transient Current Switched Circuit |
○Daisuke Hara・Noboru Wakatsuki（Isinomaki Senshu Univ.） |
| (17) |
14:00-14:15 |
Research on quartz sand fuse for pre-arcing time - current characteristics |
○Zhang Hao・Hua Xin・Wang Jiao・Liu Zhiyuan・Yan Jing・Geng Yingsan（Xi'an Jiaotong Univ.） |
| |
14:15-14:25 |
休憩 （ 10分 ） |
| (18) |
14:25-14:40 |
Experimental study of SF6 and its gas mixtures with CF4 for a high voltage gas circuit breaker |
○Kai Zhu（Xi'an Jiaotong Univ.）・Jianying Zhong（Henan Pinggao Electric）・Xingwen Li・Xu Jiang・Hu Zhao・Shenli Jia（Xi'an Jiaotong Univ.） |
| (19) |
14:40-14:55 |
Arc Blowing for Slowly Breaking Different Shape Silver-Tin Dioxide Contacts by Arc Guide with External DC Magnetic Field |
○Yoshiki Kayano（Akita Univ.）・Hiroshi Inoue（The Open Univ.） |
| (20) |
14:55-15:10 |
Experimental Study on Arc Duration under Different Atmospheres |
○Chen Li・Zhen-biao Li・Qian Wang・Du Liu（HUST） |
| (21) |
15:10-15:25 |
Influence of Contact Opening Speed on Motion of Arc Spots on Contact Surfaces for Break Arcs occurring in a DC 450V Circuit |
○Kojun Konishi・Junya Sekikawa（Shizuoka Univ.） |
| (22) |
15:25-15:40 |
Research on the Influence of Contact gap on AC Arc Duration of Electromagnetic Relay |
○Xuerong Ye・Zhao Han・Xinglei Cui・Huimin Liang・Guofu Zhai（Harbin Inst. of Tech.） |
| |
15:40-15:55 |
休憩 （ 15分 ） |
| (23) |
15:55-16:10 |
Kaolinite and Natural Rubber Composite Foams for Insulators Preparation |
○Nuchnapa Tangboriboon・Surarit Samattai（Kasetsart Univ.）・Anuvat Sirivat（Chulalongkorn Univ.） |
| (24) |
16:10-16:25 |
Influence of microstructure on static welding force of pure silver solid rivet contacts |
○Heng Wang・Suhua Li・Guowei Li・Xiaoping Bai・Wei Weng・Liqiang Liu（Fuda Alloy Materials） |
| (25) |
16:25-16:40 |
Effect of Different In Contents on Hardness and Microstructure of AgSnIn Alloy During Internal Oxidation |
○Jie Li・Xiaofang Yan・Xiaoping Bai・Liqiang Liu・Suhua Li・Wei Weng（Fuda Alloy Materials） |
| (26) |
16:40-16:55 |
A Study on Embedded F-SIR Type Transmission Line in IC Chip for Negative Group Delay |
○Xiaofan Yang・Yoshiki Kayano（Akita Univ.）・Hiroshi Inoue（The Open Univ.） |
11月17日(日) 午前
08:15 - 12:05 |
| (27) |
08:15-08:30 |
Co-Simulation Technology of Intelligent Contactor |
○Xu Zhihong・Tang Longfei（Fuzhou Univ.） |
| (28) |
08:30-08:45 |
The Control Technology of Double Closed Loop and Self-correction for AC Contactors |
○Tang Longfei・Xu Zhihong（Fuzhou Univ.） |
| (29) |
08:45-09:00 |
Study on arc characteristics of a DC bridge-type contactor in air and nitrogen at different pressure |
○Xue Zhou・Wenying Yang・Xinglei Cui・Guofu Zhai（Harbin Inst. of Tech.） |
| (30) |
09:00-09:15 |
Research on Arcless Operation for AC Contactor |
○Lianzhou Xu・Xili Wang・Zhiyong Wang・Yanli Liu・Fengyi Guo（Liaoning Technical Univ.） |
| |
09:15-09:25 |
休憩 （ 10分 ） |
| (31) |
09:25-09:40 |
Three-dimensional observation of damage shapes caused by break arcs on Ag and AgSnO2 contact surfaces |
○Daichi Kawamura・Makoto Hasegawa（Chitose Inst. of Science & Tech.） |
| (32) |
09:40-09:55 |
Time Variation of Contact Resistance after Contact of Silver Electrical Contacts |
○Satoshi Ishikura・Junya Sekikawa（Shizuoka Univ.） |
| (33) |
09:55-10:10 |
Observation of Cathode Surfaces Being Affected by a Break Arc |
○Masato Nakamura・Junya Sekikawa（Shizuoka Univ.） |
| (34) |
10:10-10:25 |
Experimental Investigation on the Role of Sphere Indenter in Measuring Contact Resistance of Flat Rivets |
○Wanbin Ren・Yu Chen・Shengjun Xue（Harbin Inst. of Tech.）・Guenther Horn（ElConMat Consulting Associates）・Guofu Zhai（Harbin Inst. of Tech.） |
| (35) |
10:25-10:40 |
Experimental study on root profile of molten bridge under different current at low opening speed |
Xinyun Zhang・Xinglei Cui・○Xue Zhou・Guofu Zhai（Harbin Inst. of Tech.） |
| |
10:40-10:50 |
休憩 （ 10分 ） |
| (36) |
10:50-11:05 |
Simulation of Current Oscillation in HVDC MRTB |
○Yang Li・Mingzhe Rong・Chunping Niu・Yi Wu・Hui Chen・Mei Li（Xi'an Jiaotong Univ.） |
| (37) |
11:05-11:20 |
Influence of Fabrication Method on Arcing Erosion Behaviour of AgSnO2 Contact Materials |
○Chunping Wu（Central South Univ.）・Wei Weng・Xiaoping Bai・Suhua Li・Danqing Yi（FuDa Alloy Materials）・Jiemin Zhou（Central South Univ.） |
| (38) |
11:20-11:35 |
Effects of ZnO powder prepared by different methods on the properties of Ag/ZnO Electric Contact Materials |
○Zhijun Wei・Lingjie Zhang・Qianhong Shen（Zhejiang Univ.）・Lawson Chen（Wenzhou Hongfeng Electrical Alloy）・Xianping Fan・Yang Hui（Zhejiang Univ.） |
| (39) |
11:35-11:50 |
An experimental study on influences of contact opening speeds on break arc characteristics of Ag and AgSnO2 contacts |
○Makoto Hasegawa（Chitose Inst. of Science & Tech.） |
| (40) |
11:50-12:05 |
A review of theoretical models of dynamic welding of electrical contacts |
○Adrian Sienicki・Piotr Borkowski（Lodz Univ. of Tech.） |
11月17日(日) 午後
13:15 - 18:10 |
| (41) |
13:15-13:30 |
Influence of Surrounding Gases on Thermodynamic and Transport Properties of Arc Plasma Occurring between Ag contacts |
○Takuya Hara・Junya Sekikawa（Shizuoka Univ.） |
| (42) |
13:30-13:45 |
Simulation Research on Physical Characteristics of Low-voltage Switching Arc Plasma Sheath in Air |
○Wanying Liu・Guogang Zhang・Pengfei Zhang・Yingsan Geng（Xi'an Jiaotong Univ.） |
| (43) |
13:45-14:00 |
Comparison of two methods to adjust the current setting value of the magnetic release in DC high speed circuit breaker |
○Jianyu Qu・Qian Wang・Xingwen Li・Degui Chen（Xi'an Jiaotong Univ.） |
| (44) |
14:00-14:15 |
Calculate Very Fast Transient Current by the Inverse Operation of the radiated transient electromagnetic field due to Switch Operation in Gas Insulated Switchgear |
○Weifeng Xin・Guogang Zhang・Jianqiang Wang・Kai Liu・Yingsan Geng（Xi'an Jiaotong Univ.） |
| |
14:15-14:25 |
休憩 （ 10分 ） |
| (45) |
14:25-14:40 |
Effect of Ambient Temperature on the Contact Resistance of Sliding Contacts on a Silver Slip Ring and Silver Graphite Brush |
○Mifuyu Fuchimoto・Koichiro Sawa・Takahiro Ueno（Nippon Inst. of Tech.） |
| (46) |
14:40-14:55 |
Reconsideration of the Application of Silver Plating on Electrical Contacts in Signal Connectors |
○Yilin Zhou・Shichao Ge・Chengming Yuan（Beijing Univ. of Posts and Telecommunications） |
| (47) |
14:55-15:10 |
Analysis of Signal Characteristics of Faulty Connector in Communication Systems |
○Rui Ji・Jinchun Gao・Gang Xie（Beijing Univ. of Posts and Telecommunications）・Chen Chen（Schlumberger） |
| (48) |
15:10-15:25 |
Simulation of connector's vibration performance |
○Lin Xue-Yan・Long Hui-Juan（Beijing Univ. of Posts and Telecommunications） |
| |
15:25-15:40 |
休憩 （ 15分 ） |
| (49) |
15:40-15:55 |
Erosion Rate of Carbon Contacts by Arc Discharge in Various Fuels |
○Koichiro Sawa・Cheng Chan Wei・Takahiro Ueno（Nippon Inst. of Tech.） |
| (50) |
15:55-16:10 |
The influence of magnetic and electric fields to the arc motion in low-voltage apparatus |
○Hongwu Liu・Ruiliang Guan・Nairui Yin・Weiwen Lu（Changshu Switchgear Mfg.） |
| (51) |
16:10-16:25 |
The Trying of Reducing Low-voltage Apparatus' Contact Resistance and Temperature-rising Using Shape Memory Alloy (SMA) |
○Tian Xinjiang（Hongmei Electronic） |
| (52) |
16:25-16:40 |
Thermal Analysis on Spring Contacts of High Voltage Apparatus |
○Ruochen Qiang・Chunping Niu・Xiaohua Wang・Yi Wu・Mingzhe Rong（Xi'an Jiaotong Univ.）・Guangyao Jin（Henan Pinggao Electric） |
| (53) |
16:40-16:55 |
Prediction of Temperature Rise in MV Switching Cabinet |
○Duanlei Yuan・Haiyan Wang（PingGao Group）・Jian Liu・Joseph Yan（The Univ. of Liverpool） |
| |
16:55-17:05 |
休憩 （ 10分 ） |
| (54) |
17:05-17:20 |
Study on Propagation Characteristics of PD-induced Electromagnetic Wave in GIS with T Shaped Structure |
○Tianhui Li・Mingzhe Rong・Dingxin Liu・Xiaohua Wang（Xi'an Jiaotong Univ.） |
| (55) |
17:20-17:35 |
Magnetic field simulation research of new TMF-AMF contacts |
○Wenyi Li・Min Li・Xiaoqin Wang・Shuping Sun・Lansuo Yang（Tianjin Pinggao Intelligent Electric） |
| (56) |
17:35-17:50 |
Computational study of arc behavior under external magnetic field in an SF6 circuit breaker |
Junmin Zhang・○Minmin Niu（Beihang Univ.） |
| (57) |
17:50-18:05 |
The influences of nozzle structural parameters on gas flow for SF6 circuit breaker |
Junmin Zhang・○Zhuo Wu（Beihang Univ.） |
| |
18:05-18:10 |
閉会挨拶 （ 5分 ） |
: tj
k
ipc
-
t
