Committee |
Date Time |
Place |
Paper Title / Authors |
Abstract |
Paper # |
EMD |
2011-03-04 12:15 |
Saitama |
Nippon Institute of Technology |
A study of transfer concerning W based composite materials containing WS2 for low speed sliding test Masaomi Arai, Yoshitada Watanabe, Kota Kawana (Kogakuin Univ.) EMD2010-152 |
Low sliding tests were performed on three kinds of W-based composite materials containing WS2 for electric sliding conta... [more] |
EMD2010-152 pp.1-4 |
EMD |
2011-03-04 12:30 |
Saitama |
Nippon Institute of Technology |
A comparative study of sliding characteristics of Cu-Ni based composite materials and W based composite materials Ryohei Saito, Yoshitada Watanabe, Kohei Maruyama (Kogakuin Univ.) EMD2010-153 |
Sliding characteristics for electrical sliding contact of Cu-Ni based composite materials containing WS2, C of 40,50,60[... [more] |
EMD2010-153 pp.5-8 |
EMD |
2011-03-04 12:45 |
Saitama |
Nippon Institute of Technology |
Research on sliding characteristic of copper, silver slipring, with carbon, silver brush under atmosphere change Takuro Yotsukura, Syota Kodama, Hiroyuki Sato, Koichiro Sawa, Noboru Morita, Takahiro Ueno (Nippon Inst. of Tech.) EMD2010-154 |
[more] |
EMD2010-154 pp.9-12 |
EMD |
2011-03-04 13:00 |
Saitama |
Nippon Institute of Technology |
Study for the structure of copper surface film in the growing process by thermal oxidation Rikuya Ikuta, Takashi Umahashi, Isao Minowa (Tamagawa Univ.) EMD2010-155 |
[more] |
EMD2010-155 pp.13-16 |
EMD |
2011-03-04 13:15 |
Saitama |
Nippon Institute of Technology |
Fabrication of LC filter circuit for the measurement of resistor's distortion voltage Masaya Ikeda, Isao Minowa, Hiroshi Kikuchi (Tamagawa Univ.) EMD2010-156 |
[more] |
EMD2010-156 pp.17-20 |
EMD |
2011-03-04 13:30 |
Saitama |
Nippon Institute of Technology |
Evaluation of Contact Probe for Contact Resistance Measurement Satoru Oohira, Soushi Masui, Shigeru Sawada, Terutaka Tamai, Kazuo Iida (Mie Univ), Yasuhiro Hattori (AN-Tech) EMD2010-157 |
[more] |
EMD2010-157 pp.21-24 |
EMD |
2011-03-04 14:00 |
Saitama |
Nippon Institute of Technology |
Observation of Tin Plated Point of Contacts Yusuke Mori, Kazuo Iida, Yasushi Saitoh, Shigeru Sawada (Mie Univ.), Yasuhiro Hattori (AutoNetworks Technologies, Ltd) EMD2010-158 |
The connectors which applied to automobile is very important in safety and reliability now. In this report, the 40N load... [more] |
EMD2010-158 pp.25-28 |
EMD |
2011-03-04 14:15 |
Saitama |
Nippon Institute of Technology |
Influence of Thermal Environments for Connectors on Vehicle Jin Hirabayashi, Yuya Saruwatari, Yasushi Saitoh, Terutaka Tamai, Kazuo Iida (Mie Univ), Yasuhiro Hattori (ANT) EMD2010-159 |
Connectors for vehicle are used under very severe conditions and grow worse by temperature changes and vibrations when v... [more] |
EMD2010-159 pp.29-32 |
EMD |
2011-03-04 14:30 |
Saitama |
Nippon Institute of Technology |
Comparison of hauling force between series & parallel connection of electric motor by readhesion control in 5-inches large model electric locomotive Hideyuki Watanabe, Hidenori Ito, Daichi Kawarahata, Naohiro Saito, Yu Yifan, Kiyoshi Onodera, Lu Zijun, Makoto Takanezawa, Noboru Morita (Nippon Inst. of Tech.) EMD2010-160 |
This research is in association with improvement of hauling force for electric rolling stock.
In recent years, as a res... [more] |
EMD2010-160 pp.33-36 |
EMD |
2011-03-04 14:45 |
Saitama |
Nippon Institute of Technology |
In Vitro Measurement by Vibration Scanning Method for Puncture Needle-Type Ultrasonography Masayuki Kiya, Kouichi Karasawa, Masasumi Yoshizawa (Tokyo Metropolitan Coll. of Ind Tech.), Takasuke Irie (Microsonic co., ltd.), Tadashi Moriya (Tokyo Metro Univ.), Kouichi Itoh (Hitachi-Omiya Saiseikai Hospital) EMD2010-161 |
For realization of low-cost, faster scanning rate, and improvement of scanning resolution of puncture needle-type ultras... [more] |
EMD2010-161 pp.37-40 |
EMD |
2011-03-04 15:00 |
Saitama |
Nippon Institute of Technology |
Observation of Current Flow Point in Contact Surface of a Current Collecting Mechanism Hideki Kitajima, Hiroki Ryobuchi, Syota Ogawa, Koichiro Sawa, Takahiro Ueno (Nippon Inst. of Tech.) EMD2010-162 |
[more] |
EMD2010-162 pp.41-44 |
EMD |
2011-03-04 15:30 |
Saitama |
Nippon Institute of Technology |
A study of optimum dimension of the interpole tip width for increase the output power to DC machine Shinya Endou, Kazunari Matsushita, Zhang Qingliang, Takahiro Ueno, Noboru Morita (Nippon Inst. of Tech.) EMD2010-163 |
DC machine has been used in steel industries and paper industries, Owing to their advantages for adjustable speed drive.... [more] |
EMD2010-163 pp.45-48 |
EMD |
2011-03-04 15:45 |
Saitama |
Nippon Institute of Technology |
Reliability of DC motor driving automotive fuel pump in various fuels Daichi Kumakiri, Akihisa Yamaguchi, Hidenori Tanaka, Liu Liqing, Koichiro Sawa, Takahiro Ueno (Nippon Inst. of Tech.) EMD2010-164 |
[more] |
EMD2010-164 pp.49-52 |
EMD |
2011-03-04 16:00 |
Saitama |
Nippon Institute of Technology |
An experimental study on an evaluation system of a contact surface profile with an optical cross-section method Keisuke Takahashi, Makoto Hasegawa (Chitose Inst. of Sci & Tech.) EMD2010-165 |
Contact surfaces of mechanical relays and switches are often damaged by arc discharges and/or mechanical wear during swi... [more] |
EMD2010-165 pp.53-56 |
EMD |
2011-03-04 16:15 |
Saitama |
Nippon Institute of Technology |
A study on rotation characteristics of speckle patterns observed in an output light spot from an optical fiber Muneki Kawahara, Yusuke Takahashi, Makoto Hasegawa (Chitose Inst. of Sci & Tech) EMD2010-166 |
When coherent light beams (laser beams) are incident on one end of an optical fiber, transmitted to another end to exit ... [more] |
EMD2010-166 pp.57-60 |
EMD |
2011-03-04 16:30 |
Saitama |
Nippon Institute of Technology |
Influence of source voltage on various characteristics of electromagnetic contactor with only break arc Tomoya Kida, Wataru Tomitaka, Koichiro Sawa, Kiyoshi Yoshida (Nippon Inst. of Tech.) EMD2010-167 |
Tests at several source voltages were carried out to clarify the influence of the voltage on various characteristics, ar... [more] |
EMD2010-167 pp.61-64 |
EMD |
2011-03-04 16:45 |
Saitama |
Nippon Institute of Technology |
Arking phenomena having the influence on the reliability for eathquake disaster prevention relays Tomoki Doutou, Syunsuke Hara, Yoshitada Watanabe (Kogakuin Univ.) EMD2010-168 |
In this study, the degree of vibration acceleration using a relay for the Great Hanshin Earthquake disaster (972gal) was... [more] |
EMD2010-168 pp.65-68 |