Committee |
Date Time |
Place |
Paper Title / Authors |
Abstract |
Paper # |
WBS |
2012-10-26 15:30 |
Kyoto |
Kyoto Univ. |
[Invited Talk]
Approach to Wiring Harness Simplification in In-Vehicle Communication Networks Daisuke Umehara (Kyoto Inst. of Tech.), Shinichi Ishiko, Toshiyasu Tsubouchi (AutoNetworks Technologies) WBS2012-34 |
In-vehicle communication networks are constructed to communicate a number of electronic control units (ECU) with each ot... [more] |
WBS2012-34 pp.45-50 |
CS |
2012-07-13 09:45 |
Kagoshima |
China-cho-Kominkan (Okinoerabu Island) |
High Rate and High Multiplexing CAN by Short Pulse Shingo Nitta, Daisuke Umehara, Koichiro Wakasugi (KIT), Shinichi Ishiko, Toshiyasu Tsubouchi (AutoNetworks Technologies, Ltd) CS2012-41 |
Controller area network (CAN) is one of communication standards for in-vehicle control networks and enables electronic c... [more] |
CS2012-41 pp.101-106 |
EMD |
2012-03-02 14:45 |
Tokyo |
Tanagawa Univ. |
Influence of Oil on Contact Resistance of Gold Plated Contacts Keisuke Taniguchi, Kazuo Iida, Atsushi Shimizu, Yasushi Saitoh, Shigeru Sawada (Mie Univ.), Yasuhiro Hattori (AutoNet Tech.) EMD2011-134 |
As for the automotive connector, the miniaturization and multipolarization are advanced attendant upon making electronic... [more] |
EMD2011-134 pp.33-36 |
EMD, R |
2012-02-17 14:40 |
Kyoto |
|
Effect of Contact Sliding on Contact Resistance Characteristics Syougo Sasayama (Mie Univ.), Yasushi Saitoh (ANtech), Terutaka Tamai (ELtech), Kazuo Iida (Mie Univ.), Yasuhiro Hattori (ANtech) R2011-49 EMD2011-123 |
The contact resistance characteristics with contact load which considered wiping by making distance and load into a para... [more] |
R2011-49 EMD2011-123 pp.41-44 |
EMD, R |
2012-02-17 15:05 |
Kyoto |
|
Effect of Intermittent Time on Fretting Corrosion of Tin Plated Coupon Jumpei Yasuda, Kazuo Iida (Mie Univ.), Yasushi Saitoh (ANTech), Shigeru Sawada (Mie Univ.), Yasuhiro Hattori (ANTech) R2011-50 EMD2011-124 |
Recently, there is a problem as increasing contact resistance by fretting corrosion in automobile connector. This increa... [more] |
R2011-50 EMD2011-124 pp.45-50 |
CS |
2011-11-17 09:30 |
Hokkaido |
Hokkaido Kawayu Hot Spring |
Short Pulse Line Codes for High Rate CAN Daisuke Umehara (Kyoto Inst. of Tech.), Shinichi Ishiko, Toshiyasu Tsubouchi (AutoNetworks Technologies) CS2011-49 |
The controller area network (CAN) is widely used as a data link protocol to link electronic control units (ECUs) in a ve... [more] |
CS2011-49 pp.13-18 |
EMD |
2011-11-18 08:45 |
Akita |
Akita Univ. Tegata Campus |
Current Density Analysis in Contact Area by Using Light Emission Diode Wafer Shigeru Sawada, Shigeki Tsukiji (Mie Univ.), Terutaka Tamai (ElconTech Consulting), Yasuhiro Hattori (Autonetworks Lab.) EMD2011-88 |
In order to clarify the theory of contact resistance, there are many reports in these years. Mathematically the
constri... [more] |
EMD2011-88 pp.115-119 |
EMD |
2011-11-18 09:05 |
Akita |
Akita Univ. Tegata Campus |
Estimation of Contact Resistance of Tin Plated Ccontacts by Fretting Corrosion Soshi Masui, Shigeru Sawada (Mie Univ.), Terutaka Tamai (ElconTech Consulting), Yasuhiro Hattori (Autonetworks Lab.), Kazuo Iida (Mie Univ.) EMD2011-89 |
[more] |
EMD2011-89 pp.121-126 |
EMD |
2011-11-18 09:25 |
Akita |
Akita Univ. Tegata Campus |
Deformation of Crystal Morphology in Tin Plated Contact Layer caused by Loading Terutaka Tamai (Elcontech Consulting), Shigeru Sawada (Mie Univ.), Yasuhiro Hattori (AutoNetworks Lab.) EMD2011-90 |
Tin (Sn) plated contacts are widely applied to connector contacts in aut
omotive industries. Surfaces of plated tin are... [more] |
EMD2011-90 pp.127-132 |
EMD |
2011-11-18 09:45 |
Akita |
Akita Univ. Tegata Campus |
Stress-Strain Response of Copper-Based Spring Materials under Forward and Reverse Deformations and Its Mathematical Description 2 Yasuhiro Hattori, Kingo Furukawa (AutoNetworks Lab.), Fusahito Yoshida (Hiroshima Univ.) EMD2011-91 |
The prediction of the force - displacement relation by the finite element method (FEM) is very important for the design ... [more] |
EMD2011-91 pp.133-136 |
EMD |
2011-10-21 13:25 |
Tokyo |
Tachikawa-Shiminn-kaikan |
Investigation of Environments for Connectors on Vehicle Yuya Saruwatari (Mie Univ), Yasushi Saitoh, Terutaka Tamai (ANtech), Kazuo Iida (Mie Univ), Yasuhiro Hattori (ANtech) EMD2011-59 |
Recently years, according to downsizing of connectors which applied to automobiles, reductions of contact load in connec... [more] |
EMD2011-59 pp.13-18 |
OFT, OCS (Joint) |
2011-08-25 16:55 |
Hokkaido |
|
Novel Transmitter and Receiver Optical Sub-Assembly
-- Application of Electron Beam Cross-linking Technologies for Tranceperarent Resin -- Tomomi Sano, Kiyoshi Kato, Michiko Harumoto, Takayuki Shimazu, Kaoru Hirashima, Dai Sasaki, Naoki Nishiyama, Akira Inoue (SEI), Naoki Adachi, Hiroshi Tateishi, Yuuji Nakura, Shigeo Hayashi (ANL) OFT2011-21 |
(Advance abstract in Japanese is available) [more] |
OFT2011-21 pp.25-28 |
CS |
2011-07-07 14:25 |
Okinawa |
Kumejima |
[Invited Talk]
Low Cost Modulation and Detection for In-Vehicle Narrowband Power Line Communications Yasuhiro Yabuuchi (Sumitomo Electric), Daisuke Umehara (Kyoto Inst. of Tech.), Masahiro Morikura (Kyoto Univ.), Shinichi Ishiko, Toshiyasu Tsubouchi (AutoNetworks Technologies) CS2011-18 |
The complexity in in-vehicle control network systems is increasing with enlarging their sophistication and diversity. We... [more] |
CS2011-18 pp.47-51 |
EMD |
2011-03-04 14:00 |
Saitama |
Nippon Institute of Technology |
Observation of Tin Plated Point of Contacts Yusuke Mori, Kazuo Iida, Yasushi Saitoh, Shigeru Sawada (Mie Univ.), Yasuhiro Hattori (AutoNetworks Technologies, Ltd) EMD2010-158 |
The connectors which applied to automobile is very important in safety and reliability now. In this report, the 40N load... [more] |
EMD2010-158 pp.25-28 |
OFT, OPE |
2011-03-04 16:55 |
Tokyo |
Kikai-Shinko-Kaikan Bldg. |
Optical Components for Automobile LAN System Kiyoshi Kato, Tomomi Sano, Naoki Nishiyama, Itaru Sakabe, Kaoru Hirashima (SEI), Yuji Nakura, Hiroyoshi Maesoba, Naoki Adachi, Hiroshi Tateishi (ANT) OFT2010-76 OPE2010-180 |
For automobile optical LAN system, the optical fiber, the optical transceiver and the optical connector were developed. ... [more] |
OFT2010-76 OPE2010-180 pp.69-72 |
EMD, R |
2011-02-18 13:05 |
Shizuoka |
Shizuoka Univ. (Hamamatsu) |
Peculiar Phenomena for Increase in Friction Coefficient due to Application of Lubrication Terutaka Tamai, Shigeru Sawada (Mie Univ.), Yasuhiro Hattori (AN Lab.) R2010-42 EMD2010-143 |
For tin plated connector contacts, it was found that friction coefficient at lubricated contacts was higher than the fri... [more] |
R2010-42 EMD2010-143 pp.1-6 |
EMD, R |
2011-02-18 13:30 |
Shizuoka |
Shizuoka Univ. (Hamamatsu) |
Direct Viewing of Current in Contact Area used by Light Emission Diode Shigeki Tsukiji, Shigeru Sawada, Terutaka Tamai (Mie Univ.), Yasuhiro Hattori (AN-Tech), Kazuo Iida (Mie Univ.) R2010-43 EMD2010-144 |
[more] |
R2010-43 EMD2010-144 pp.7-12 |
EMD |
2011-01-28 13:25 |
Tokyo |
Japan Aviation Electronics Industry,Limited |
Three-Dimensional Micro-Structural Study of Tin Plated Fretting Contacts Tetsuya Ito, Shigeru Ogihara, Yasuhiro Hattori (ANT) EMD2010-136 |
Fretting corrosion, by which the contact resistance increases, is one of the typical problems occurred in automotive con... [more] |
EMD2010-136 pp.5-10 |
CS |
2010-11-11 10:30 |
Ishikawa |
Wakura Hot Spring |
A Study of Modulation Schemes Suitable for In-Vehicle Power Line Communications Yasuhiro Yabuuchi, Daisuke Umehara, Masahiro Morikura (Kyoto Univ.), Toshiya Hisada, Shinichi Ishiko (SEI), Satoshi Horihata (AutoNetworks Technologies) CS2010-41 |
In-vehicle signal transmission requires dedicated communication cables such as twisted metal wires andoptical ber cable... [more] |
CS2010-41 pp.23-28 |
EMD |
2010-11-11 13:45 |
Overseas |
Xi'an Jiaotong University |
Observations of Structural Transition of Tin Plated Fretting Contacts using FIB-SEM Tetsuya Ito, Shigeru Ogihara, Yasuhiro Hattori (AutoNetworks) EMD2010-82 |
In recent years, there has been increasing demand to miniaturize wiring harness connectors in automobiles due to the inc... [more] |
EMD2010-82 pp.65-68 |