講演抄録/キーワード |
講演名 |
2006-04-20 09:00
回路合成理論に基づく広帯域ブランチ形ハイブリッドの設計式 ○大島 毅・早乙女秀之・大塚昌孝・砂原米彦(三菱電機) エレソ技報アーカイブへのリンク:SCE2006-1 MW2006-1 |
抄録 |
(和) |
本報告では,回路合成理論に基づく広帯域ブランチ形ハイブリッドの構成および設計式を示す.本ハイブリッドは,1/4波長線路からなる通常のブランチラインハイブリッドと集中定数素子による直並列共振回路からなる多段整合回路で構成される.1/4波長線路の特性アドミッタンスと集中定数素子の素子値は,原形整合回路を周波数変換することで,数式により近似的に表現される.そのため,端子の負荷コンダクタンス,整合回路の段数,所定の周波数帯域あるいは許容される反射振幅を与えることで最適設計が可能となる.回路シミュレーションの結果,整合回路を1段装荷した場合に-20dB以下となる反射振幅の比帯域幅は,35%にまで広帯域化されることがわかった. |
(英) |
In this report, a design procedure of broadband branch-type hybrids is described based on the network synthesis theory. The hybrids shown here are constructed from a conventional branch-line hybrid comprised of quarter-wavelength lines and the multistage matching networks comprised of the series and parallel resonant circuits of lumped elements. The characteristic admittances of these lines and each value of lumped elements are approximately represented as closed form expression through a proper bandpass mapping for a prototype matching network. Therefore, the optimized design is easily enabled by giving the load conductance at each port, the number of matching stages and the desired fractional bandwidth or allowable reflection amplitude. |
キーワード |
(和) |
マイクロ波 / カプラ / ハイブリッド / 広帯域 / 整合回路 / 回路合成 / / |
(英) |
microwave / couplers / hybrids / broadband / matching networks / network synthesis / / |
文献情報 |
信学技報, vol. 106, no. 12, MW2006-1, pp. 1-6, 2006年4月. |
資料番号 |
MW2006-1 |
発行日 |
2006-04-13 (SCE, MW) |
ISSN |
Print edition: ISSN 0913-5685 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
エレソ技報アーカイブへのリンク:SCE2006-1 MW2006-1 |
|