講演抄録/キーワード |
講演名 |
2006-10-20 13:25
端末内蔵アンテナの共振周波数に与える樹脂ケースの影響 ○岩井 浩・坂田 勉・山本 温・小川晃一(松下電器) AP2006-90 |
抄録 |
(和) |
本論文では移動体端末の樹脂ケースが内蔵アンテナの共振周波数に与える影響について検証した.樹脂ケースを想定した誘電体平板を内蔵アンテナに近接配置した場合に,誘電体平板の厚さ,比誘電率,誘電体平板との距離によって共振周波数がどのように変化するか2GHz帯において定量的に調べた.今回の検討では,内蔵アンテナとして一般的な板状逆Fアンテナ(PIFA)を金属板(125×35mm2)上に配置した端末モデルを用いた.その結果,誘電体平板(厚さ1mm,比誘電率3,誘電正接0.005)を平面アンテナに対して密着させた場合に,共振周波数の低減率は7.3%となった.この場合,ABS樹脂およびポリプロピレン樹脂製の誘電体平板(100×100mm2)を実際に端末モデルに近接させた場合、解析結果とよく一致した.さらに,共振周波数が2GHzとなるよう再調整した結果,36%の小型化を実現した. |
(英) |
Resin-housing effects on the resonant frequency of handset built-in antennas are discussed in this paper. A resin plate assumed as a resin-housing was located close to the planar inverted F antenna (PIFA) mounted on the rectangular metal plate (125 by 35mm2). The size of the PIFA was determined so that the resonant frequency became 2GHz. Variations of resonant frequency were examined when the permittivity (r), the thickness (t) of the resin plate and the distance (s) between the resin plate and the PIFA were varied. The results indicate that the reduction of resonant frequency was 6.8% in the case of r =3, t=1mm and s=0mm. Furthermore, it is found that the miniaturization of 36% was achieved by the resin plate adjacent to the PIFA. |
キーワード |
(和) |
樹脂ケース / 共振周波数 / 内蔵アンテナ / 板状逆Fアンテナ / 携帯電話端末 / / / |
(英) |
resin-housing / resonant frequency / built-in antenna / planar inverted F antenna / mobile terminal / / / |
文献情報 |
信学技報, vol. 106, no. 302, AP2006-90, pp. 79-84, 2006年10月. |
資料番号 |
AP2006-90 |
発行日 |
2006-10-12 (AP) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
AP2006-90 |