講演抄録/キーワード |
講演名 |
2006-12-08 11:20
チャネル光導波路を用いたボード内波長多重光配線の提案 ○山口智史・小林貴之・粟辻安浩・裏 升吾(京都工繊大)・金高健二(産総研) エレソ技報アーカイブへのリンク:LQE2006-107 |
抄録 |
(和) |
ボード内チップ間を超広帯域で接続する波長多重光導波路配線を検討している.これまで薄膜光導波路配線ボードにグレーティングカップラを集積し,VCSELからのもしくはPDへの空間光を結合する構成であった.今回,チャネル光導波路を積層し縦型Y分岐導波路及びDBRを集積して空間光を45度ミラーを介して波長アドドロップする構成を提案する.これにより数倍の高密度化が期待できる.設計予測値はY分岐テーパ長160μm(分岐角1.79°)でモード間結合効率95%以上,周期285nmで結合長300μmのDBRの結合波長850nmでの回折効率は97%以上,45°ミラーを介した入力結合効率は94%以上と見積もられた.予備実験として2次元構造の縦型Y分岐導波路及びDBRを作製し各々の機能を確認した. |
(英) |
WDM optical interconnects using channel optical waveguides with vertical Y-branches and distributed Bragg reflectors (DBRs) was proposed for chip-to-chip ultra-broadband signal transmission. Use of channel optical waveguides has an advantage of high-density integration. Vertical Y-branch waveguides and DBRs forming optical add/drop multiplexers and 45$^{\circ}$ mirrors were designed. Efficiencies were predicted to be > 95% for guided mode couplings by Y-branch of 1.79$^{\circ}$ branch angle, > 97% for DBR reflection and > 94% for input coupling by 45$^{\circ}$ mirror. Two-dimensional vertical Y-branch waveguide and DBR were fabricated and each function was demonstrated. |
キーワード |
(和) |
チャネル光導波路 / 波長多重 / 光インターコネクション / Y分岐 / 45度ミラー / 光アドドロップ / / |
(英) |
channel optical waveguides / wavelength division multiplexing / optical interconnects / Y-branch / 45° mirror / optical add/drop multiplexers / / |
文献情報 |
信学技報, vol. 106, no. 404, LQE2006-107, pp. 21-26, 2006年12月. |
資料番号 |
LQE2006-107 |
発行日 |
2006-12-01 (LQE) |
ISSN |
Print edition: ISSN 0913-5685 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
エレソ技報アーカイブへのリンク:LQE2006-107 |