講演抄録/キーワード |
講演名 |
2007-01-18 13:25
ミリ波帯誘電体基板支持トリプレート伝送線路フィルタの不要放射抑圧 黒木太司・○宮本和哉(呉高専) エレソ技報アーカイブへのリンク:ED2006-218 MW2006-171 |
抄録 |
(和) |
誘電体基板の片面にエッチングにより中心導体を構成したトリプレート伝送線路はセンチ波帯で多用されるが、帯域フィルタなどの不連続部が多い回路素子にあっては構造の非対称から不要放射が発生する。そこで本論では誘電体基板の両面にエッチングにより中心導体を構成したプリント基板を平行平板内に挿入することで問題を回避し、ミリ波帯で3段0.1dBリップルチェビシェフ型フィルタを設計した。さらにこの伝送線路では誘電体基板の上下に蒸着した中心導体は同電位にあるため接する誘電体の表皮荒さの影響を受けず、誘電体材料の誘電正接の影響も軽減することができ低損失であることも理論的に実証された。 |
(英) |
Although a dielectric-supported tri-plate transmission line is usually used at centimeter frequencies, undesired radiation occurs in circuit elements such as a BPF due to its asymmetrical structure. In this paper, we solved this problem by making center conductors on both surfaces of the dielectric substrate and designed a three-pole 0.1dB ripple Chebychev band-pass filter by using such guiding structure, termed bilaterally metal-loaded tri-plate strip line. It was obvious that the transmission characteristics of the bilaterally metal loaded tri-plate strip line was unaffected by the skin effect, because the two center conductors were the same voltage, and hence, the low-loss nature. And moreover, the insertion loss of the designed band-pass filter was small due to its low-loss nature as well as no-undesired radiation. |
キーワード |
(和) |
プリント基板 / 低損失 / トリプレート線路 / ミリ波 / / / / |
(英) |
printed boards / low loss / tri-plate transmission lines / millimeter waves / / / / |
文献情報 |
信学技報, vol. 106, no. 460, MW2006-171, pp. 99-103, 2007年1月. |
資料番号 |
MW2006-171 |
発行日 |
2007-01-10 (ED, MW) |
ISSN |
Print edition: ISSN 0913-5685 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
エレソ技報アーカイブへのリンク:ED2006-218 MW2006-171 |