講演抄録/キーワード |
講演名 |
2007-12-18 15:25
スタブを用いた3dBブランチラインカプラの小型化設計 ○柴田純也・安藤友樹・中村 寛・安藤浩哉・杉浦藤虎・塚本武彦(豊田高専) MW2007-134 エレソ技報アーカイブへのリンク:MW2007-134 |
抄録 |
(和) |
伝送線路にスタブを配置することにより,伝送線路の長さ,または伝送線路の特性インピーダンスを変更することができる.このことを利用し,ブランチラインカプラ各部の伝送線路の長さを短くした小型ブランチラインカプラを作成した.その結果,2ブランチのカプラでは,伝送線路の長さが2/3になり,面積が50%に小型化された.3ブランチのカプラでは,伝送線路の長さが4/5になり,面積が70%に小型化された.これらのカプラはスタブの無い通常の2,3ブランチラインカプラとほぼ同じ周波数特性を有することが確認できた.更に,伝送線路の特性インピーダンス(伝送線路の幅)が自由に変えられることに着目し,ブランチラインカプラ各部の伝送線路の特性インピーダンスが全て等しくなる円形のブランチラインカプラを設計し,スタブの無い通常の2ブランチラインカプラとほぼ同じ周波数特性を有することを確認した. |
(英) |
An open-ended stub which is attached to a transmission line at the center reduces the length of the transmission line. The length of the transmission line depends on the characteristic impedance of the transmission line, the characteristic impedance of the stub line and the length of the stub line. It means the size of the transmission line networks could be reduced by properly changing parameters mentioned above. In this manuscript, the examples of the size reduction of the 3-dB branch line couplers are shown. In the cases of 2-branchline coupler and 3-branchline coupler, the area are reduced to 50% and 70%, respectively. A design of 2-branchline coupler with stubs which consists of all transmission lines of the same characteristic impedance is also shown. |
キーワード |
(和) |
ブランチラインカプラ / 小型化設計 / スタブ / / / / / |
(英) |
branch-line coupler / size-reduction / transmission line network / stub / / / / |
文献情報 |
信学技報, vol. 107, no. 394, MW2007-134, pp. 41-46, 2007年12月. |
資料番号 |
MW2007-134 |
発行日 |
2007-12-11 (MW) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
MW2007-134 エレソ技報アーカイブへのリンク:MW2007-134 |