講演抄録/キーワード |
講演名 |
2007-12-18 13:30
発振器用反射形0次共振器の高負荷Q化の検討 ○津留正臣・川上憲司・檜枝護重・宮崎守泰(三菱電機) MW2007-130 エレソ技報アーカイブへのリンク:MW2007-130 |
抄録 |
(和) |
発振器の低位相雑音化には,高負荷Qの共振器の実現が重要である.筆者らは,高負荷Q共振器の一つとして0次共振器を検討しており,反射形0次共振器を適用した発振器の試作結果をすでに報告した.しかしながら,共振器の段数増加に対して期待される程の高負荷Q化は得られていなかった.検討した結果,共振器の各段の結合が影響していると考えられる.したがって,ここでは各段の一部を共通化した0次共振器の構成を提案し,試作および評価を行ったので報告する.測定の結果,共振器の段数と負荷Qの関係が計算と一致し,期待される負荷Qが得られた. |
(英) |
It is important to realize a high loaded Q for a low phase noise oscillator. We have studied a reflection type zeroth-order resonator as one of the high loaded Q resonators, and already have reported measurement results of an oscillator with the reflection type zeroth-order resonator. However, there is problem that the expected higher loaded Q is not achieved by increasing number of stages. As a result of considerations, the reason will be effect of coupling of each stage. Therefore, this paper proposes the zeroth-order resonator that parts of each stage are connected, and shows measurement results. Theory and measurement results of the loaded Q agreed and the expected higher loaded Q was achieved. |
キーワード |
(和) |
0次共振器 / 左手系 / メタマテリアル / 負荷Q / 発振器 / 位相雑音 / 反射形 / |
(英) |
Zeroth-order resonator / Left-handed / Meta-material / Loaded Q / Oscillator / Phase noise / Reflection-type / |
文献情報 |
信学技報, vol. 107, no. 394, MW2007-130, pp. 19-22, 2007年12月. |
資料番号 |
MW2007-130 |
発行日 |
2007-12-11 (MW) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
MW2007-130 エレソ技報アーカイブへのリンク:MW2007-130 |