講演抄録/キーワード |
講演名 |
2008-01-18 11:10
直並列共振回路を用いた低位相雑音、高出力差動VCO ○長谷川廣行・鈴木佑輔・坂本正之・伊藤康之(湘南工科大) ED2007-227 MW2007-158 エレソ技報アーカイブへのリンク:ED2007-227 MW2007-158 |
抄録 |
(和) |
定電流源に直並列共振回路を用いた低位相雑音,高出力差動VCOについて述べる.低位相雑音を実現するために,従来の定電流源に代わって直並列共振回路を用いた.直並列共振回路は設計帯域内ではインダクタとなり,Hartley発振器のように動作する.また帯域外ではインピーダンスが低いHPFまたはLPFになり,不要な発振を防止する.定電流源に直並列共振回路を用いた差動VCOを1GHz帯で設計,試作,評価を行い,-108 dBc/Hz @ 100 kHz at 990 MHzの位相雑音特性,+12 dBmの高出力特性が得られた. |
(英) |
A low phase-noise, high output power SiGe HBT differential VCO has been developed by using series and parallel resonant circuits. In order to achieve low phase-noise, high output power, and stable oscillation, series and parallel resonant circuits are used in place of the current source. The series and parallel resonant circuit operates as an inductor within the design band, LPF or HPF out of the design band. The LPF or HPF becomes short-circuited out of the design band, contributing to a stable oscillation. With the use of the resonant circuit, the VCO achieves a phase noise of -108 dBc/Hz @ 100 kHz at 990 MHz and an output power of greater than +12 dBm for a supply voltage of 2 V and a current consumption of 35 mA. |
キーワード |
(和) |
差動 / VCO / SiGe HBT / マイクロ波 / 直並列共振回路 / / / |
(英) |
Differential / VCO / SiGe HBT / Microwave / Series and Parallel Resonant Circuits / / / |
文献情報 |
信学技報, vol. 107, no. 421, MW2007-158, pp. 125-128, 2008年1月. |
資料番号 |
MW2007-158 |
発行日 |
2008-01-09 (ED, MW) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
ED2007-227 MW2007-158 エレソ技報アーカイブへのリンク:ED2007-227 MW2007-158 |
|