| 講演抄録/キーワード |
| 講演名 |
2008-01-21 16:05
昇圧入力形フルブリッジコンバータの特性解析 ○富岡 聡(デンセイ・ラムダ)・二宮 保(九大) EE2007-51 |
| 抄録 |
(和) |
一般に力率改善回路として,比較的容易に高力率が得られる昇圧コンバータが用いられている.しかし,この方法を用いると絶縁出力を得るためにでDC-DCコンバータを接続する2段方式になり,コスト,サイズ,効率が問題となる.筆者らが先に提案した,2つの昇圧コンバータとフルブリッジコンバータを組み合わせた1段方式力率改善コンバータは,時比率0.5以上で制御できない問題があった.本論文では2次側インダクタを不連続モードで使用することで,時比率0.5以上でも制御できる改良型コンバータを提案する.このコンバータの特性を状態平均化法を用いて解析した.さらに,直流入力および交流入力で実験を行い,入力電流リップルが小さい,ZVS動作で損失が小さい等の特長を確認した. |
| (英) |
A boost type converter is used in general for power-factor correction. In this case, a DC-DC converter is connected behind the boost converter to generate the isolated output voltage on secondary side. Such a two-stage converter has drawbacks of high cost, large size, and low efficiency. Previously, the full bridge converter that was combined with two boost converters has been proposed. However, this converter can not be controlled in the duty ratio range of more than 0.5. In this paper, the improved type boost-input type full bridge converter that can control in the duty ratio of more than 0.5 is proposed. Furthermore, the characteristics of this converter was analyzed using state-space-averaging method. Experimental result of DC and AC input show some merit of this converter such as low input current ripple and high efficiency by ZVS. |
| キーワード |
(和) |
昇圧コンバータ / 力率改善回路 / ZVS / インターリーブ方式 / / / / |
| (英) |
Boost converter / Power-factor-correction / ZVS / Interleave / / / / |
| 文献情報 |
信学技報, vol. 107, no. 430, EE2007-51, pp. 41-46, 2008年1月. |
| 資料番号 |
EE2007-51 |
| 発行日 |
2008-01-14 (EE) |
| ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
| PDFダウンロード |
EE2007-51 |