| 講演抄録/キーワード |
| 講演名 |
2008-07-24 15:15
ベローズ型ダイレクトメタノール燃料電池における流体シミュレーション解析 ○今井龍則・谷内利明(東京理科大) EE2008-17 |
| 抄録 |
(和) |
モバイル機器類の高機能化に伴う消費電力の増加を受け,理論エネルギー密度がリチウムイオン二次電池の十倍以上とされる,ダイレクトメタノール燃料電池(以下DMFC)が注目されている.その中の一つとして燃料供給の安定化・燃料供給量の増加を図ったベローズ型DMFCが提案されている.ベローズ型DMFCは,特殊なセル配置が原因で,セル面内の中央部と外周部で,出力が4倍近く異なる問題があった.先の報告で,燃料電池の中に薄膜を設け,空気を均等に拡散させることで,出力差を低減できることを示した.本報告では,3次元のシミュレーションモデルを構築し,薄膜形状の最適化を図ったので,その結果を報告する. |
| (英) |
As the function of the mobile devices is increased, the power consumption is increased. The direct methanol fuel cell (DMFC) has been paid attention because of the theoretical density of it is ten times or more than that of the lithium ion rechargeable battery. We proposed Bellow type DMFC that is expected stability of the fuel supply and increase of the amount of the fuel supply. However the bellows type DMFC has the problem that the output of the cell outside area is about four times smaller than that of the cell inside area because of the special composition. In the previous report, we showed a new Bellows type DMFC structure which had the thin film at the center of the cell to decrease the deviation of the output in the cell area by uniformly diffusing air in the cell. In this paper, it has been studied the optimization of the thin film by using the three dimensions simulation model. |
| キーワード |
(和) |
ダイレクトメタノール燃料電池(DMFC) / ベローズ型 / 薄膜 / / / / / |
| (英) |
The direct methanol fuel cell (DMFC) / Bellows type / thin film / / / / / |
| 文献情報 |
信学技報, vol. 108, no. 150, EE2008-17, pp. 31-36, 2008年7月. |
| 資料番号 |
EE2008-17 |
| 発行日 |
2008-07-17 (EE) |
| ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
| PDFダウンロード |
EE2008-17 |