講演抄録/キーワード |
講演名 |
2008-12-12 17:30
広帯域な同軸-コニカル-ラジアル線路変換部をもつ円筒型多分岐電力分配/合成器 ○鎌田裕之・佐薙 稔・藤森和博・野木茂次(岡山大) MW2008-162 エレソ技報アーカイブへのリンク:MW2008-162 |
抄録 |
(和) |
マイクロ波高出力固体増幅器を実現する方法の一つとして電力分配-合成系があるが、これに必要となる広帯域かつ低損失な特性を持つ電力分配/合成器として、広帯域な同軸-コニカル-ラジアル線路変換部を持つ円筒形電力分配/合成器について検討した。電力分配/合成器は同軸-コニカル-ラジアル線路変換部である中心部と、ラジアル線路中に同軸プローブを挿入した周辺部とで構成される。変換部では同軸線路から2段階のコニカル線路を経てラジアル線路に変換する。ラジアル線路の特性インピーダンスは虚部を持つので2段階目のコニカル線路を4分の1波長変成器のような整合線路として用いる。それにより、より広い周波数範囲で、
より低い反射を有する変換器が設計できる。試作した12分配電力分配器の特性を
測定することで本設計手法の有効性を確認した。 |
(英) |
Cylindrical power divider/combiner’s with broadband coaxial-conical-radial line transition have been studied, which have broadband and low loss characteristics required for the power dividing-combining systems in order to realize microwave high power solid-state amplifiers. The power divider/combiner’s is composed of the coaxial-conical-radial line transition as the central part, and the peripheral part in which the coaxial probes are line. In the transition, the coaxial line is converted via two sections of the conical lines to the radial line. The characteristic impedance of the radial line has an imaginary part, and so that the conical line of the second stage is used as a matching line such as the quarter-wavelength transformer. Therefore, the transition can be designed which have lower return loss in the wide frequency range.
The validity of the design procedure was confirmed with the experiments for the prototype twelve-way dividers. |
キーワード |
(和) |
マイクロ波 / 電力分配/合成器 / コニカル線路 / ラジアル線路 / 整合線路 / 隅切り曲がり / / |
(英) |
microwave / power divider/combiner / conical line / radial line / matching line / mitered bend / / |
文献情報 |
信学技報, vol. 108, no. 350, MW2008-162, pp. 91-96, 2008年12月. |
資料番号 |
MW2008-162 |
発行日 |
2008-12-05 (MW) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
MW2008-162 エレソ技報アーカイブへのリンク:MW2008-162 |