講演抄録/キーワード |
講演名 |
2008-12-18 11:25
RFスイッチと伝送線路を用いた2ビット周波数可変共振器 ○大塚純一・森 弘樹・福田良太・山尾 泰(電通大) RCS2008-156 |
抄録 |
(和) |
移動通信では複数の周波数帯が使用されているため,現在の端末は周波数帯毎に個別に無線回路を設け,これらを切替ている.今後さらに周波数を有効利用しつつ端末の回路規模の増加を抑えるには,より多数の周波数へ柔軟に切り替え可能なリコンフィギャラブルRF回路を検討する必要がある.本稿では2つの伝送線路とそのそれぞれの中間にRFスイッチを配置することによって4つの共振周波数の切替えが可能な2ビット周波数可変共振器を提案する.提案にはλ/2共振モードを用いた構成,λ/4共振モードを用いた構成,及びそれらを併用した構成の3種類の可変共振回路が含まれる.これらの利害得失を比較し,周波数特性について解析および回路シミュレーションを行った.また,このうち小形化に適したλ/4共振モードを用いた構成について,高誘電率プリント基板による予備試作を行った結果を述べる. |
(英) |
Since multiple frequency bands are used for mobile communication systems, the current terminals are installed with multiple radio circuits that cover each frequency band individually and one of them is selected for use. In order to make efficient use of frequency specrum and to reduce circuit scale of terminals in the future, reconfigurable RF circuits will be necessary that are able to change flexibly many frequencies. This paper proposes two-bit variable frequency resonator that can change four resonance frequencies with two RF switches and a transmission line. Three kinds of variable resonance circuits, employing /2 resonance mode, /4 resonance mode and their combined mode, are included in the proposal. After the advantages for the three mode circuits are compared, frequency characteristics are analyzed by circuit simulations. A preliminary prototype using a high dielectric print substrate has been fabricated and evaluated for the /4 resonance mode resonator, which has advantage in conpactness. |
キーワード |
(和) |
λ/4共振モード / 伝送線路 / 可変共振回路 / RFスイッチ / / / / |
(英) |
Reconfigurable RF circuit / /4 resonator / Transmission line resonator / RF switch / / / / |
文献情報 |
信学技報, vol. 108, no. 358, RCS2008-156, pp. 31-36, 2008年12月. |
資料番号 |
RCS2008-156 |
発行日 |
2008-12-11 (RCS) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
RCS2008-156 |