| 講演抄録/キーワード |
| 講演名 |
2009-01-22 13:50
同軸装荷二重折返しモノポールアンテナの特性 ○山崎正明・築地武彦(福岡大) AP2008-168 |
| 抄録 |
(和) |
アンテナの給電点付近でリアクタンス値を装荷するとアンテナの小型化できるが,アンテナの小型化に伴い入力抵抗が低くなる.このため折返しアンテナのステップアップ原理を使い,小型装荷アンテナの抵抗値の増加に利用し高いインピーダンス値が得られる.この原理を利用してより高い抵抗値を持つ,二重折返しモノポールアンテナを提案した.また,同アンテナは二重折返し構造により平行伝送線路による装荷の効果も得ている.一方,同軸線路は装荷アンテナの装荷素子として使われる.これにより二重折返しモノポールの平行伝送線路部分を同軸線路で置換えた同軸装荷二重折返しモノポールを提案した.同アンテナについてモーメント法を用いて計算を行い,その妥当性を実験より確かめた上で,アンテナ特性を示した. |
| (英) |
It has been shown that loading a certain reactance component at the feeding point of an antenna is useful in reducing antenna size. However, a small antenna usually has low input resistance. The approach outlined is to increase the input resistance of the small loading antenna and utilize knowledge of a folded monopole antenna. A small folded monopole antenna called the double folded monopole antenna with high resistance can then be realized. Coaxial line is also used as the loading element for the loading antenna. It is proposed that a coaxial cable DFMA can be realized by replacing the parallel transmission line loading with coaxial cable transmission line loading. All other results are provided by computer simulation using the method of moments, since results are assumed to be similar to those recorded from practical experimentation. |
| キーワード |
(和) |
二重折返し / 同軸線路 / 装荷 / 共振周波数 / 入力抵抗 / / / |
| (英) |
Double-folded / Coaxial Line / Load / Resonant Frequency / Input Resistance / / / |
| 文献情報 |
信学技報, vol. 108, no. 386, AP2008-168, pp. 107-111, 2009年1月. |
| 資料番号 |
AP2008-168 |
| 発行日 |
2009-01-14 (AP) |
| ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
| PDFダウンロード |
AP2008-168 |