講演抄録/キーワード |
講演名 |
2009-01-23 10:15
空孔アシストファイバのメカニカルスプライスにおける損失特性 ○小山 良・齊藤浩太郎・阿部宜輝・星島徹也・冨田 茂(NTT) OFT2008-82 |
抄録 |
(和) |
空孔アシストファイバのメカニカルスプライスにおいて,従来のSMFにおけるメカニカルスプライスと同等の挿入損失を実現する条件について検討を行なった.本検討ではメカニカルスプライスにおいて生じる損失の主要な要因について検証し,次にその損失を無視できる条件について計算と測定の両面から検証した.その結果,ファイバコアと空孔内に浸入した屈折率整合剤の間のモード結合が,空孔アシストファイバの接続部における損失の主な要因であることが分かった.また,屈折率整合剤の空孔への浸入距離を50µm以下とすれば,HAFのメカニカルスプライスにおいて従来のSMFにおけるメカニカルスプライスと同等の挿入損失が実現できることを明らかにした. |
(英) |
We studied about the requirement to make the insertion loss of a mechanical splice in hole-assisted fibers low as one of a mechanical splice in single-mode fibers. First, we studied about which cause affects the insertion loss mainly, and we searched the requirement to reduce the loss of the cause to almost 0 dB. It was revealed that the most of the insertion loss is caused by the mode coupling between the core of the hole-assisted fiber and the index matching oil filling the holes of the hole-assisted fiber. We also revealed that the requirement to make the loss caused by the mode coupling almost 0 dB is to make the filling length of the index matching oil in the hole-assisted fiber less than 50 µm. |
キーワード |
(和) |
空孔アシストファイバ / メカニカルスプライス / 接続損失 / 屈折率整合剤 / / / / |
(英) |
Hole-assisted fiber / Mechanical splice / Splice loss / Index matching oil / / / / |
文献情報 |
信学技報, vol. 108, no. 395, OFT2008-82, pp. 55-58, 2009年1月. |
資料番号 |
OFT2008-82 |
発行日 |
2009-01-15 (OFT) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
OFT2008-82 |