講演抄録/キーワード |
講演名 |
2009-09-04 13:00
UWB用抵抗装荷プリントダイポールアンテナの特性 ○金本幸司・笹森崇行・戸花照雄・礒田陽次(秋田県立大) AP2009-96 |
抄録 |
(和) |
UWB無線システムは,非常に広い帯域幅にわたって電力を拡散させる無線システムであり,数百Mbps規模の高速通信を可能とするほか,高精度な測位等を可能とするものとして期待されている.本報告では,UWB用抵抗装荷プリントダイポールアンテナを提案し,その特性を明らかにする.まず,ダイポールアンテナ上に抵抗を連続的に装荷する場合の抵抗値を表すWu-Kingプロファイルを基にして離散的に抵抗を装荷する方法を提案し,ダイポールアンテナを用いて装荷する抵抗値および装荷する位置の求め方について述べる.次に,求めた装加抵抗の値と位置をプリントダイポールアンテナに適用し,その特性を実験とFDTD法を用いた解析によって評価する. |
(英) |
Currently, a resistively loaded dipole antenna has been proposed as one of the antennas with a broadband characteristic. By using a dipole antenna with continuous resistive loading, it is possible to create a small traveling wave antenna with a broadband characteristic.However, it is not easy to produce the necessary continuous resistance distribution.
In this paper, a printed dipole antenna with resistive loading is developed for UWB applications.First, a loading technique of lumped resistor on the antenna element based on the well-known Wu-King
profile is proposed.This technique enables the fabrication of the resistively loaded printed dipole antenna using surface mount chip resistors.Next, after evaluating the simulated and the measured results of the return loss characteristics, the gain, the bit eror rate and the measured results of the radiation patterns are presented and discussed. |
キーワード |
(和) |
UWB / FDTD / 抵抗装荷アンテナ / ダイポールアンテナ / / / / |
(英) |
UWB / FDTD / resistively loaded antenna / dipole antenna / / / / |
文献情報 |
信学技報, vol. 109, no. 183, AP2009-96, pp. 97-102, 2009年9月. |
資料番号 |
AP2009-96 |
発行日 |
2009-08-27 (AP) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
AP2009-96 |