| 講演抄録/キーワード |
| 講演名 |
2009-10-22 14:40
抵抗膜長補償用段間容量素子を設けた2段ウィルキンソン型電力分配器 ○湯浅 健・重永晃一・田原志浩・大和田 哲・米田尚史(三菱電機) EMCJ2009-49 MW2009-98 |
| 抄録 |
(和) |
多段ウィルキンソン型電力分配器は,広帯域な電力分配器として様々なマイクロ波用途で用いられている.同分配器は分配端子に近付くにつれて高い抵抗値のアイソレーション抵抗が必要となり,誘電体基板上に設けた抵抗膜を使用する場合,比較的長い抵抗膜長が必要となるため,抵抗膜長が無視できない周波数帯において生じる特性劣化の改善が課題である.本稿では,抵抗膜長を補償するための段間容量素子を設けた2 段ウィルキンソン型電力分配器について検討を行ったので報告する.段間容量素子は奇モード励振時において短い抵抗膜を,偶モード励振時において長い抵抗膜をそれぞれ補償する回路として動作するものであり,上記補償回路を実現するために必要な抵抗膜幅の設計方法を示す.提案回路のシミュレーション結果および実測結果より,同回路の有効性を示した. |
| (英) |
A multi-section Wilkinson power divider is used as broadband power dividers/combiners for many microwave applications. Although this divider can be simply realized with microstrip lines and resistive films, it needs relatively long resistive films near the divided ports to achieve high resistance value for isolation resistors. The length of the resistive films degrades the divider performance at high frequency region where the length is not negligible compared with the wavelength. In this paper, a 2-section Wilkinson power divider with intersectional capacitive elements for compensating the length of the resistive films has been presented. The intersectional capacitive elements operate as the compensating network for short resistive film in odd-mode and long resistive film in even-mode. The validity of the proposed divider has been demonstrated by the simulation and measurement results. |
| キーワード |
(和) |
ウィルキンソン型電力分配器 / 抵抗膜 / 補償回路 / 容量素子 / / / / |
| (英) |
Wilkinson power divider / Resistive film / Compensating network / Capacitive element / / / / |
| 文献情報 |
信学技報, vol. 109, no. 242, MW2009-98, pp. 31-35, 2009年10月. |
| 資料番号 |
MW2009-98 |
| 発行日 |
2009-10-15 (EMCJ, MW) |
| ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
| PDFダウンロード |
EMCJ2009-49 MW2009-98 |