講演抄録/キーワード |
講演名 |
2010-03-05 15:10
電磁シーム圧接用空芯トランスの特性 ○田口貴啓・堀之内忠浩・石橋正基・岡川啓悟・相沢友勝(都立産技高専) EMD2009-135 エレソ技報アーカイブへのリンク: EMD2009-135 |
抄録 |
(和) |
電磁圧接,電磁成形実験では,コンデンサ電源からコイルに100kA以上の放電大電流を通電して大きな電磁力を発生させる.放電スイッチには,通常,気中ギャップスイッチが使われる.このスイッチとして半導体スイッチが使用できれば,便利である.そのためには,放電スイッチとコイルの間にトランスを入れて,スイッチに流れる電流を小さくして,コイルに流れる大電流を維持する必要がある.ここでは,結合係数の高い電磁圧接用空芯トランスを製作し,基本的な特性を調べたので概要を報告する. |
(英) |
The magnetic pulse welding is peculiar technology using large electromagnetic force. Pulse large current flowing through the flat one-turn coil is produced this large electromagnetic force. However, there is only using the spark gap switch for discharged the capacitor energy, since the pulse current exceeds 100kA. The spark gap switch needs the maintenance in the every discharge. Then, the transformer is introduced in order to reduce the current, apply the semiconductor switch. In this study, the air core transformer of 2:1 turn ratio was made, and the primary current was reduced in about 1/2. It was possible to produce the transformer of the very high coupling coefficient by the proposed production method. |
キーワード |
(和) |
電磁シーム圧接 / パルス大電流 / 空芯トランス / 結合係数 / / / / |
(英) |
Magnetic pulse welding / Pulse large current / Air core transformer / Coupling coefficient / / / / |
文献情報 |
信学技報, vol. 109, no. 452, EMD2009-135, pp. 33-36, 2010年3月. |
資料番号 |
EMD2009-135 |
発行日 |
2010-02-26 (EMD) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
EMD2009-135 エレソ技報アーカイブへのリンク: EMD2009-135 |