| 講演抄録/キーワード |
| 講演名 |
2010-03-05 09:50
ミリ波帯両面金属装荷トリプレート線路の中心導体位置ずれから発生する不要モード ○川頭弘幸・表 祐介(呉高専)・田丸了次(青学大)・黒木太司(呉高専) MW2009-201 |
| 抄録 |
(和) |
両面金属装荷トリプレート伝送線路は低損失であるが、実際に製作する際には水平対称面に対して位置ずれが生じるおそれがあり、その結果損失の増加が懸念される。またその他実際の製作で生じる損失増加の要因として、エッチング時の製作誤差または銅箔の欠落により、2つの中心導体幅が異なるおそれがある。そこで本論では両面金属装荷トリプレート伝送線路共振器を一例として、その中心導体の位置ずれ及び一方の中心導体幅欠落によって生じる無負荷Qの劣化と、損失増加による影響の抑圧に関する検討を行った。 |
| (英) |
Although the BIT line has a low loss nature at millimeter wave frequencies, it may face difficulties such as generation of unwanted modes due to happening to make asymmetrical structures in manufacturing process. For example, the dielectric-supported center conductors may be displaced for a horizontal mid-plane, the dielectric substrate being fixed by spacers with slightly-different dimensions, or a width of one of two center conductors may be unintentionally chipped by actual etching. To evaluate increasing dissipation loss due to such asymmetrical structures, degradation of Q factors was investigated using a BIT line resonator and a technique to overcome such difficulties was proposed using via-holes. |
| キーワード |
(和) |
マイクロ波・ミリ波 / プリント線路 / 共振器 / / / / / |
| (英) |
Microwaves and millimeter-waves / Transmission lines / Resonators / / / / / |
| 文献情報 |
信学技報, vol. 109, no. 431, MW2009-201, pp. 129-132, 2010年3月. |
| 資料番号 |
MW2009-201 |
| 発行日 |
2010-02-25 (MW) |
| ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
| PDFダウンロード |
MW2009-201 |