| 講演抄録/キーワード |
| 講演名 |
2010-05-28 14:00
携帯電話用ワイアレス充電回路の実使用環境での影響 ○竹野和彦・上村治雄(NTTドコモ) EE2010-1 |
| 抄録 |
(和) |
近年,簡易な携帯電話の充電方法を確立する技術としてワイアレス充電を適用することが検討されている.このワイアレス充電技術では,従来のAC/DCコンバータのトランス部分を分離してその1次側を携帯電話の置き台に,二次側を携帯電話本体に内蔵したものである.そのコイルとして平面インダクタを採用したことにより携帯電話に内蔵することを実現している.本稿では,この平面インダクタを用いたワイアレス回路を内蔵した携帯電話の試作機の性能評価の1つとして,実動作上の課題として位置の影響,環境の影響および放射雑音特性の評価を行った.この結果,横方向のずれや置き台の下の材質の影響が実用化の課題であることを明らかにした. |
| (英) |
To easily charge mobile phones comfortably, Wireless power supply technologies using Electromagnetic induction have been discussed recently. In wireless power supply technologies, the mobile phone and the charging holder on the side of the transformer conventionally included in the AC adapter are spatially separated, a thin coil is incorporated in both the holder and the mobile terminal, and power is transmitted by bringing the two coils in proximity to each other. In this paper, we have measured the influence of the position gap between the both of plane indictors, charging environment and emission noise properties. As results, we showed that problems of the practical use are the influence of the wide gap between both inductors, and the influence of the materials under the charging holder. |
| キーワード |
(和) |
携帯電話 / ワイアレス充電 / 平面インダクタ / 電磁誘導 / 位置ずれ / / / |
| (英) |
Mobile phone / Wireless power supply / Plane indictor / Electromagnetic induction / Position gap / / / |
| 文献情報 |
信学技報, vol. 110, no. 65, EE2010-1, pp. 31-36, 2010年5月. |
| 資料番号 |
EE2010-1 |
| 発行日 |
2010-05-21 (EE) |
| ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
| PDFダウンロード |
EE2010-1 |