| 講演抄録/キーワード |
| 講演名 |
2010-06-11 09:00
[招待講演]垂直磁気転写法によるサーボ信号記録 ○杉田龍二・小峰啓史(茨城大) MR2010-7 |
| 抄録 |
(和) |
磁気転写法を用いることにより,ハードディスクにサーボ信号を,従来方法に比べて桁違いの高速,高精度,かつ低コストで書き込むことができる.垂直ハードディスクに磁気転写する方法としては,転写時にディスク面に垂直に転写磁場を印加するビット転写と,ディスク面に平行に印加するエッジ転写がある.前者によって転写されたディスクからの再生波形は,磁気ヘッド記録されたディスクからの再生波形に近いという利点がある.一方,後者は短ビット長領域において高いS/Nが期待できる.垂直磁気転写は,50 nm以下のビット長に対しても可能であり,Tb/in2級ハードディスクに対応できる性能を有している. |
| (英) |
Servo signals can be written with incredibly high speed compared to conventional methods, high accuracy and low cost by using a magnetic printing method. There are two types of magnetic printing for perpendicular hard disks. One is bit printing where printing magnetic field is applied in perpendicular direction, and the other is edge printing where the field is applied in in-plane direction. The merit of the bit printing is that the reproduced waveform from printed hard disks is almost the same as that from head-recorded ones. On the other hand, in the edge printing high S/N is expected in short bit length region. It is possible to magnetic-print the bit below 50 nm long, which shows the perpendicular magnetic printing is usable for ultrahigh density hard disks such as 1 Tb/in2 or more. |
| キーワード |
(和) |
磁気転写 / 垂直磁気転写 / サーボ信号 / ハードディスク / / / / |
| (英) |
Magnetic Printing / Perpendicular Magnetic Printing / Servo Signal / Hard Disk / / / / |
| 文献情報 |
信学技報, vol. 110, 2010年6月. |
| 資料番号 |
|
| 発行日 |
2010-06-03 (MR) |
| ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
| PDFダウンロード |
MR2010-7 |