講演抄録/キーワード |
講演名 |
2011-01-24 14:45
共振型検出コイルと結合したSQUIDの性能評価 ○平川慎太郎・百冨隆二・松尾政晃・円福敬二(九大)・神鳥明彦(日立) SCE2010-45 エレソ技報アーカイブへのリンク:SCE2010-45 |
抄録 |
(和) |
T=77Kでの冷却銅検出コイルと共振結合したHTS SQUIDの設計,実験を行った.検出コイルは高周波におけるコイル抵抗の増加を低減するために複数本の素線を撚り合わせたリッツ線で作製した.まず,リッツ線の素線径dfを0.04から0.2 mmに変化させた時の直流から100 kHzの周波数帯でのコイル抵抗の特性を測定した.素線径dfが減少すると,高周波でのコイル特性が改善されることが明らかになった.次に,平均直径D = 45 mm,巻数N = 150の検出コイルを使ってマグネットメータを構成した.共振周波数f = 10.15Hzにおけるマグネットメータの磁界雑音の測定値は3.3 fT/Hz1/2となった.また,共振回路のQ値はQ = 153となった.実験結果は設計値とおおよそ良く一致した.今回得たマグネットメータの高い感度は低磁場NMR応用にも有用である. |
(英) |
We have designed and tested an HTS SQUID magnetometer using resonant coupling of copper pickup coil cooled at T=77 K. The pickup coil was made of a Litz wire, so as to prevent the increase of the coil resistance at high frequencies. First, we measured the coil characteristics from dc to 100 kHz when the diameter df of the elementary filament of the Litz wire was changed between 0.04 and 0.2 mm. We showed that the coil characteristics at high frequencies can be improved by using a small diameter df. Next, we constructed a magnetometer using a pickup coil with average diameter D=45 mm and number of turns N=150. The measure magnetic field noise of the magnetometer was 3.3 fT/Hz1/2 at the resonant frequency of f = 10.15 kHz. The Q value of the resonant circuit was Q=153. The experimental results agreed reasonably well with the designed value. The obtained high sensitivity of the magnetometer will be useful for the application to low field NMR. |
キーワード |
(和) |
高温SQUID / 冷却検出コイル / マグネットメータ / リッツ線 / 低磁場核磁気共鳴 / / / |
(英) |
high Tc SQUID / cooled pickup coil / magnetometer / Litz wire / low field NMR / / / |
文献情報 |
信学技報, vol. 110, no. 385, SCE2010-45, pp. 51-56, 2011年1月. |
資料番号 |
SCE2010-45 |
発行日 |
2011-01-17 (SCE) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
SCE2010-45 エレソ技報アーカイブへのリンク:SCE2010-45 |