講演抄録/キーワード |
講演名 |
2011-01-28 13:00
炭素アーク電圧電流特性に関する一考察 ○須原啓一(東京高専) EMD2010-135 エレソ技報アーカイブへのリンク:EMD2010-135 |
抄録 |
(和) |
誘導性回路における炭素電極開離アークの過渡的電圧・電流の推移を、炭素アーク電圧電流特性を使用して解析している。参照できる炭素アーク電圧電流特性は少ないが、エアトンのアーク特性式とホルムのアーク特性図が、よく知られている。また、筆者も、独自に炭素アーク電圧電流特性式を求めている。これら3つは、どれも実測結果に基づいているが、測定の方法や範囲が異なっているので、それらの関係を確認しておくことが必要である。この報告書では、これら3つの特性を比較し、それらの関係について検討した。その結果、ホルムの特性図及び筆者の特性式はエアトン特性式の小電流・短間隙部分を補うものであることを確認した。さらに、筆者の特性式は、ホルムの特性図に近いこと、電極間隙1mm以上に外挿した場合にエアトンの実測値をある程度近似できることがわかった。 |
(英) |
The author is trying to calculate the transient arc voltage and arc current at breaking carbon contacts in an inductive circuit by using carbon arc V-I characteristics. The number of referable carbon arc V-I characteristics is not so many; only Ayrton's equation and Holm's diagram are well-known. Also the author formulated carbon arc V-I characteristics equation originally. Each of these three characteristics is obtained from experimental measurement but in different experimental conditions. For this reason it is necessary to assure the relationship between them. In this report, these three characteristics are compared to each other and their relationship is discussed. As a result, Holm’s characteristics and the author’s characteristics are assured to supplement Ayrton’s equation in a small current and short gap region. It is also assured that the author’s equation can be used as a rough approximation of Holm’s diagram and, if extrapolated to longer gap length than 1mm, of Ayrton’s measurements. |
キーワード |
(和) |
炭素アーク / アーク電圧電流特性 / エアトン式 / ホルム図 / / / / |
(英) |
Carbon Arc / Arc V-I Characteristics / Ayrton’s Equation / Holm’s Diagram / / / / |
文献情報 |
信学技報, vol. 110, no. 403, EMD2010-135, pp. 1-4, 2011年1月. |
資料番号 |
EMD2010-135 |
発行日 |
2011-01-21 (EMD) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
EMD2010-135 エレソ技報アーカイブへのリンク:EMD2010-135 |