講演抄録/キーワード |
講演名 |
2011-03-04 17:45
被覆除去不要なストリップフリー光ファイバ接続技術の検討 ○廣田栄伸・阿部宜輝・浅川修一郎・小林潤也(NTT) OFT2010-78 OPE2010-182 エレソ技報アーカイブへのリンク:OPE2010-182 |
抄録 |
(和) |
光ファイバは、Fiber To The Home (FTTH) システムの光伝送媒体として広く適用されている。FTTHシステム構築には、光ファイバ接続技術が必須であり、これまでに、融着、メカニカルスプライス、光コネクタが適用されてきた。これらを用いた接続は、被覆除去したベアガラスの外径を利用することで、高精度のアライメント(低接続損失)を実現している。しかしながら、ベアガラスは脆弱であるため、接続作業中に折損しやすく、取り扱いに注意が必要である。そこで、我々は、これまで必須とされた光ファイバの被覆除去工程を不要にしたストリップフリー光ファイバ接続技術を提案する。ストリップフリー光ファイバ接続の要素技術として、アライメント技術と切断技術を開発し、ガラス外径125 μm、被覆外径250 μm の汎用SM (single-mode) 光ファイバの低損失接続(0.2 dB)を実現した。 |
(英) |
Optical fiber is being widely introduced as a communication medium to handle the fiber to the home (FTTH) systems. To construct to the FTTH systems, optical fiber connection technique is required. Many ways of connecting optical fiber including the fusion splice, mechanical splice and optical connector have been developed and are used in the FTTH systems. Conventional connection methods achieve good optical performance by aligning bare glass fibers after their coatings have been removed. However, all these connection methods require the careful handling of bare glass fiber, which is weak and easily broken. In this paper, we propose a new stripping-free connection technique that comprises an alignment technique and a cleaving technique for coated fiber. We achieve a connection loss of 0.2 dB for standard SM (single-mode) fiber with a cladding diameter of 125 um and a coating diameter of 250 um. |
キーワード |
(和) |
被覆付き光ファイバ / 切断技術 / 接続技術 / メカニカルスプライス / / / / |
(英) |
Coated optical fiber / cleaving technique / connection technique / mechanical splicer / / / / |
文献情報 |
信学技報, vol. 110, no. 436, OFT2010-78, pp. 77-81, 2011年3月. |
資料番号 |
OFT2010-78 |
発行日 |
2011-02-25 (OFT, OPE) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
OFT2010-78 OPE2010-182 エレソ技報アーカイブへのリンク:OPE2010-182 |
|