講演抄録/キーワード |
講演名 |
2011-05-27 15:20
静電塗布法における有機薄膜の表面平坦性改善と有機薄膜太陽電池 ○高木健次・浅野 俊・福田武司(埼玉大/理研)・本多善太郎・鎌田憲彦(埼玉大)・朱 正明・山形 豊・青山哲也・田島右副(理研) OME2011-20 エレソ技報アーカイブへのリンク: OME2011-20 |
抄録 |
(和) |
ウェットプロセスでバルクヘテロジャンクション型有機薄膜太陽電池を形成する為には、p型とn型の有機材料を溶解する溶媒を選択する必要があり、有機層の積層化が困難である。我々はこれまでにウェットプロセスでありながら積層化が可能な静電塗布法に関する研究を行ってきた。本研究では、有機薄膜太陽電池に広く用いられているp型材料(P3HT)とn型材料(PCBM)の混合溶液にアセトンを添加して、有機薄膜の表面平坦性改善を検討した。その結果、アセトンの割合が多くなるに従って、成膜範囲が広がり、溶液の供給速度が速くなることが分かった。さらに、主溶媒であるo-dichlorobenzeneに対するアセトンの割合を体積比で20%にすることでP3HT:PCBM混合薄膜表面の平坦化を実現し、変換効率1.92%のバルクヘテロジャンクション型有機薄膜太陽電池素子の作製に成功した。 |
(英) |
A solubility of the organic solvent against n- and p-type organic materials is necessary to realize an efficient organic photovoltaic cell (OPV). Since a multilayer structure is difficult to fabricate by a normal solution process, we investigated an electrospray deposition method to improve the device performance of the OPV. In this study, we investigated the surface roughness of the P3HT and PCBM mixed film, which was fabricated though the addition of acetone in o-dichlorobenzene. We found that the spray diameter expanded with increasing concentration of acetone in o-dichrolobenzene. In addition, the surface roughness was reduced when the concentration of acetone was 20 vol%, and the power conversion efficiency of the bulk-heterojunction OPV was achieved 1.92% due to the smooth surface roughness of the P3HT:PCBM layer. |
キーワード |
(和) |
静電塗布法 / 有機材料 / 薄膜 / 表面粗さ / 有機薄膜太陽電池 / / / |
(英) |
Electrospray Deposition Method / Organic Material / Thin Film / Surface Roughness / Organic Photovoltaic Cell / / / |
文献情報 |
信学技報, vol. 111, no. 73, OME2011-20, pp. 31-34, 2011年5月. |
資料番号 |
OME2011-20 |
発行日 |
2011-05-20 (OME) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
OME2011-20 エレソ技報アーカイブへのリンク: OME2011-20 |