講演抄録/キーワード |
講演名 |
2011-10-13 14:00
平面型記録ヘッドの高周波マイクロマグネティック解析 ○細貝秀人・金井 靖(新潟工科大)・山川清志(秋田県産技センター)・吉田和悦(工学院大)・Simon Greaves・村岡裕明(東北大) MR2011-10 エレソ技報アーカイブへのリンク:MR2011-10 |
抄録 |
(和) |
5 GHzまでの記録周波数を仮定し,平面型記録ヘッドのマイクロマグネティック記録磁界解析を行った.まず, 3種類の平面型ヘッドモデルを用い,準定常状態解析によりヨーク幅が広いほど記録磁界および横漏れ磁界が大きくなることを述べた.次に,6種類の平面型ヘッドをモデル化し,高転送レートを実現するためにはコイル位置をなるべく主磁極ポール先端に近付けることと,ヨーク高さを低くすることが重要であることを述べた.これら2つの因子と比較してヨーク幅は大きな問題とはなり得ず,多巻コイルを形成する上で利点となる.ヘッドおよび媒体裏打層の材料も検討したが,ギルバートの制動定数には影響を受けるが,交換定数および異方性定数は記録磁界の高周波応答に差異を与えなかった. |
(英) |
First, three planar heads with different yoke widths were modeled and micromagnetic analysis carried out. It was found that the wider yoke gave larger recording field and the ATE field, which was supported by the FEM analysis solving the Maxwell’s equation. Then, six different planar head structures with various yoke widths, yoke heights and coil locations were modeled and micromagnetic analysis carried out targeting a transfer-rate of up to 5 GHz. It was found, in the planar head, that the most dominant factor for high transfer-rate recording was the coil location relative to the main pole tip and the return yoke height, while the yoke width was less important. Because the multi-turn coil can be realized by the wide yoke, it is advantageous. With regard to the material characteristics, a small Gilbert damping factor was the most effective, while the exchange constant and anisotropy energy did not yield significant differences. |
キーワード |
(和) |
平面型ヘッド / 垂直磁気記録 / マイクロマグネティックシミュレーション / 高転送レート記録 / / / / |
(英) |
Planar write heads / perpendicular magnetic recording / micromagnetic simulations / high transfer-rate recording / / / / |
文献情報 |
信学技報, vol. 111, 2011年10月. |
資料番号 |
|
発行日 |
2011-10-06 (MR) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
査読に ついて |
本技術報告は査読を経ていない技術報告であり,推敲を加えられていずれかの場に発表されることがあります. |
PDFダウンロード |
MR2011-10 エレソ技報アーカイブへのリンク:MR2011-10 |