講演抄録/キーワード |
講演名 |
2012-06-29 15:45
FR-4基板を用いたBITラインにおける基本モード及び高次モードのミリ波伝送特性 ○井上晋吾・黒木太司(呉高専) MW2012-25 エレソ技報アーカイブへのリンク:MW2012-25 |
抄録 |
(和) |
FR-4基板は低価格かつ、高強度、絶縁性、難燃性といった特徴からプリント基板に多用されている。この基板のミリ波帯での利用を考え、まずFR-4基板共振器を作製し、共振器法でミリ波帯での複素誘電率を測定する。次にシミュレータをもとにFR-4共振器の固有値を計算し、その結果を用いて実験値と計算値の比較を行うことでこの周波数帯での材料定数を決定する。次に決定した材料定数を用いて、実際にBITラインを用いた線路設計を行なっていく。加工を容易にするために伝送線路の幅を広げた場合の、線路の基本モード、及び、第一高次モードでの位相定数や伝送損失などの伝送特性を比較、検討する。 |
(英) |
Since the FR-4 substrate has high-mechanical strength, good insulation, and flame retardant property, it is widely used in printed circuits. But the dielectric properties have not been investigated at millimeter-wave frequencies. So we investigate the complex permittivity by using the resonant method at millimeter-wave frequencies. Next, we calculated the eigen values using a simulation software, and then complex permittivities were estimated. Using these results, we design a circuit in BIT line. We compare and consider the transmission characteristics of the dominant and higher order modes; phase constants and transmission loss, when the width of the transmission line is expanded to improve the workability. |
キーワード |
(和) |
FR-4 / 誘電正接 / 比誘電率 / マイクロ波 / ミリ波 / 共振器法 / / |
(英) |
FR-4 / Dielectric loss tangent / Relative permittivity / Resonance method / Microwaves / Millimeter-waves / / |
文献情報 |
信学技報, vol. 112, no. 109, MW2012-25, pp. 37-40, 2012年6月. |
資料番号 |
MW2012-25 |
発行日 |
2012-06-22 (MW) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
MW2012-25 エレソ技報アーカイブへのリンク:MW2012-25 |