講演抄録/キーワード |
講演名 |
2013-01-25 11:40
高電位部への送電に適した長ギャップ非接触給電方式の検討 ○権藤亮太(同志社大)・久保敏裕・松原克夫(日新電機)・高橋康人・藤原耕二(同志社大) EE2012-49 CPM2012-171 エレソ技報アーカイブへのリンク:CPM2012-171 |
抄録 |
(和) |
電子線照射装置やイオン注入装置などでは,電子やイオンを生成するため,高電位に充電された部位に電力を供給する必要があり,所定の絶縁距離を隔てた空間を非接触で効率良く電力伝送する方式を検討している.提案回路の基本構成はハーフブリッジ回路であり,一次側のコイルに直列に,二次側のコイルに並列にコンデンサを挿入することで,無効電力を補償し,長ギャップでの給電を試みている.受電コイルは絶縁のために静電シールドを施されているが,これによって給電が阻害されるという課題がある.そこで,シールドの形状を工夫し給電の改善を図った.本稿では,送受電コイル単体の場合のギャップ長300 mmにおける給電特性,および受電側に静電シールドを設けた場合の給電特性について,実験・検証を行った結果を報告する. |
(英) |
In electron beam processing system and ion implantation devices, it is necessary to supply electric power to their high voltage region needed to generate electrons and ions. This paper investigates efficient wireless transmission of power to the high voltage region across prescribed insulating distance. In order to transit power over long gap, a half bridge topology in which a resonant capacitor is connected in series to a transmitter coil in a primary circuit and parallel to a receiver coil in a secondary circuit is adapted for reactive power compensation. Because the receiver coil is arranged near the high voltage region, it needs to be surrounded by an electrostatic shield, which results in interference of power transmission due to the action of its electromagnetic shielding. In order to overcome the problem and improve the magnetic coupling between the primary and secondary coils, the shape of the shield is devised. The simulation and experimental results of wireless power transmission at the condition that an electrostatic shield is placed between the two coils 300 mm distant or not are discussed. |
キーワード |
(和) |
非接触給電 / 静電シールド / / / / / / |
(英) |
wireless power transfer / electrostatic shield / / / / / / |
文献情報 |
信学技報, vol. 112, no. 396, EE2012-49, pp. 123-128, 2013年1月. |
資料番号 |
EE2012-49 |
発行日 |
2013-01-17 (EE, CPM) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
EE2012-49 CPM2012-171 エレソ技報アーカイブへのリンク:CPM2012-171 |