| 講演抄録/キーワード |
| 講演名 |
2013-02-22 11:20
差ビームテーパによるモノパルス測角精度の改善 ○高橋龍平・原 照幸(三菱電機) SANE2012-156 |
| 抄録 |
(和) |
フェーズドアレーレーダではモノパルス測角が広く実用化されている.ところがモノパルスコンパレータを用いるモノパルス測角の精度は,CRLBによる測角精度に比べて劣る.そこで本報告では,DBF(Digital Beamforming)方式を用いるモノパルス測角の測角精度が,CRLB(Cramer-Rao Lower Bound)より導出される理論測角精度に一致するための,素子アンテナ位置に基づくΔビーム(差ビーム)テーパを提案する.この提案のΔデータによりモノパルス測角精度がCRLBによる測角精度に一致することを,理論および計算機シミュレーションにより検証する.等間隔リニアアレーの場合,提案のΔビームテーパによりモノパルス測角精度が1.155倍改善し,CRLBによる測角精度に一致する.この精度改善により,所要測角精度の達成に必要なSNRを1.25 dB低減できる. |
| (英) |
Monopulse angle estimation technique is widely used in phased array radar systems. Conventional monopulse angle accuracy with analog monopulse combiner, however, is larger than the accuracy derived from Cramer-Rao lower bound (CRLB). In this paper, difference beam taper based on element antenna position to achieve angle accuracy of CRLB is proposed for monopulse angle estimation. Subsequently monopulse angle estimation with the proposed difference beam taper is validated through the theory development and numerical simulation. For uniform linear array case, monopulse angle accuracy is improved by a factor of 1.155 and coincides with the accuracy of CRLB. From system point of view, this improvement is equivalent with 1.25dB SNR reduction for meeting required angle accuracy. |
| キーワード |
(和) |
ディジタルビームフォーミング / モノパルス / クラメールラオの理論下限 / / / / / |
| (英) |
Digital Beamforming / Monopulse / Cramer-Rao Lower Bound / / / / / |
| 文献情報 |
信学技報, vol. 112, no. 439, SANE2012-156, pp. 43-48, 2013年2月. |
| 資料番号 |
SANE2012-156 |
| 発行日 |
2013-02-14 (SANE) |
| ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
| PDFダウンロード |
SANE2012-156 |