講演抄録/キーワード |
講演名 |
2013-03-07 10:10
抵抗値ばらつきによる特性劣化の小さいアイソレーション抵抗並列装荷型電力分配器 ○廣田明道・田原志浩・湯川秀憲・大和田 哲・山口喜次・宮崎守泰(三菱電機) MW2012-170 エレソ技報アーカイブへのリンク:MW2012-170 |
抄録 |
(和) |
出力端子間にアイソレーション抵抗を設けたWilkinson型電力分配器は,アンテナ給電回路や増幅器前後段の分配合成回路などに広く適用されている.Wilkinson型電力分配器を誘電体基板により実現する場合,しばしばアイソレーション抵抗は抵抗膜から作製される.この場合,抵抗膜の単位面積当たりの抵抗値は膜厚に依存することから,膜厚を精度良く製造することが必要である.しかし,実際には膜厚を精度良く製造することには限界があるため,製造した抵抗値が設計値と異なり,特性が劣化する問題がある.そこで,本稿では抵抗値がばらついても特性劣化の小さい分配器として,アイソレーション抵抗並列装荷型電力分配器を提案する.本分配器は,1/4波長線路を介して並列接続した2つの抵抗を出力端子間に接続した構成であり,抵抗値がばらついても2つの抵抗の合成抵抗値がほぼ一定となるため,特性劣化が小さい.X帯で動作する本分配器を設計し試作評価したところ,抵抗値が設計値から最大50%ずれた場合でも,反射・アイソレーション量が-20dB以下となる帯域幅は30.2%以上維持されており,本分配器は抵抗値がばらついても特性変動が小さいことを確認した. |
(英) |
In realizing an isolation resistor of the Wilkinson power divider by a resistance film, characteristics of the Wilkinson power divider frequently deteriorate, because a resistance changes by manufacturing errors. In this paper, a power divider with insensitivity to resistance values using a parallely-loaded resistor pair is presented. In the proposed divider, two resistors connected through 1/4-wavelength lines are placed between two output terminals. In case of changing resistance of two resistors by manufacturing errors, the characteristics of the proposed divider are stable, because a total resistance value of the resistor pair is little changed. The proposed divider is simulated and experimentally demonstrated in X-band. The return loss and isolation is lower than -20 dB in a bandwidth of 30% in the experiments. |
キーワード |
(和) |
ストリップ線路 / 抵抗膜 / Wilkinson型電力分配器 / / / / / |
(英) |
Stripline / Resistance Film / Wilkinson Power Divier / / / / / |
文献情報 |
信学技報, vol. 112, no. 459, MW2012-170, pp. 59-62, 2013年3月. |
資料番号 |
MW2012-170 |
発行日 |
2013-02-27 (MW) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
MW2012-170 エレソ技報アーカイブへのリンク:MW2012-170 |