| 講演抄録/キーワード |
| 講演名 |
2013-05-17 14:25
Ar雰囲気中におけるAgおよびAg/SnO2接点間アークの熱力学・輸送特性 ○原 拓也・関川純哉(静岡大) EMD2013-3 |
| 抄録 |
(和) |
アーク放電現象の特性は,ガス圧力,ガスの種類,電流など多くの外的条件によって左右される.これらの外的条件を考慮した上で,アーク放電現象の特性は,熱力学・輸送特性(電気伝導率・粘性係数・熱伝導率など)から記述することができる.本報告では,Ar雰囲気中におけるAgおよびAg/SnO2 12wt%接点間で発生する開離時アークについて,粒子組成および熱力学・輸送特性(電気伝導率・定圧比熱)の計算を行った.計算結果を,空気雰囲気中における開離時アークの粒子組成および熱力学・輸送特性と比較した.以下の結果が得られた.金属粒子および電子に着目すると,粒子組成は雰囲気ガスに依存しない.電気伝導率は雰囲気ガスおよび接点材料に依存しない.Ar雰囲気中における定圧比熱は,空気雰囲気中の場合と比較して値が小さくなる.また,極大となる温度が異なる. |
| (英) |
The characteristic of an arc discharge phenomenon is influenced by many external conditions, such as gas pressure, gases, and circuit current. After taking these external conditions into consideration, the characteristic of an arc discharge phenomenon can describe from the thermodynamic and transport properties (electrical conductivity, viscosity, thermal conductivity, etc.). In this report, we calculated thermodynamic and transport properties (electrical conductivity and specific heat) of arc occurring between Ag and Ag/SnO2 contact pairs in Ar atmosphere. The calculation result was compared with the particle compositions, and the thermodynamic and transport properties in air atmosphere. The following results are obtained. Focus on metallic particles and electron; the particle compositions are independent of the atmosphere gas. The electrical conductivity is independent of the atmosphere gas and the contact materials. The specific heat at constant pressure in Ar atmosphere, the value is smaller as compared with the case of air atmosphere. Moreover, the relative maximum temperature is different. |
| キーワード |
(和) |
Ar / 粒子組成 / 熱力学・輸送特性 / 電気接点 / / / / |
| (英) |
Ar / particle compositions / thermodynamic and transport properties / electrical contacts / / / / |
| 文献情報 |
信学技報, vol. 113, no. 48, EMD2013-3, pp. 11-16, 2013年5月. |
| 資料番号 |
EMD2013-3 |
| 発行日 |
2013-05-10 (EMD) |
| ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
| PDFダウンロード |
EMD2013-3 |