講演抄録/キーワード |
講演名 |
2013-05-31 13:15
遮断導波管と平面共振器のハイブリッド共振による小型有極導波管フィルタの阻止域特性改善 松本孝章・○大平昌敬・馬 哲旺(埼玉大) MW2013-21 エレソ技報アーカイブへのリンク:MW2013-21 |
抄録 |
(和) |
平面共振器を装荷した導波管フィルタは、飛び越し結合を用いずに共振器自身で減衰極を生成できる利点を持つ反面、共振器のスプリアス共振が通過域近くに発生してしまうため、阻止帯域幅が狭いという問題があった。そこで本稿では阻止域特性を改善するため、新たな小型有極導波管フィルタを提案する。本フィルタは、インバータ回路として遮断導波管を導入することで高減衰特性を実現するだけでなく、遮断導波管の誘導性成分と平面共振器を組み合わせた共振・反共振現象によって不要なスプリアス共振を発生させずに有極特性も実現している。X帯における例として3段帯域通過フィルタを設計した結果、従来の35%ほどに小型化しつつ通過域では低損失、阻止域では広い阻止帯域幅と高減衰特性が得られた。さらに、反射型共振器を追加したフィルタの設計では、良好な阻止域特性を維持しながら急峻なスカート特性が得られ、本フィルタの有効性が実証された。 |
(英) |
The waveguide bandpass filter using planar resonators can generate multiple transmission zeros at stopbands without using any cross coupling structures. However, there is a problem that bandwidth of upper stopband is narrow owing to spurious resonances of the planar resonators. To improve the stopband property, this paper proposes a compact cutoff waveguide filter introducing a new resonance mechanism. The proposed waveguide filter is simply constructed by successive arrangement of planar resonators in a cutoff waveguide, but the suppression of spurious resonances as well as the generation of multiple transmission zeros can be realized by the combination of planar anti-resonant circuits and inductive elements of cutoff waveguides. Furthermore, a high attenuation characteristic at the stopbands can be easily achieved by the cutoff behavior of the waveguide. As an example, we have designed two cutoff waveguide filters at the X band, proving the effectiveness of the proposed waveguide filter. |
キーワード |
(和) |
遮断導波管 / 導波管フィルタ / 平面共振器 / 減衰極 / / / / |
(英) |
cutoff waveguide / waveguide filter / planar resonator / transmission zeros / / / / |
文献情報 |
信学技報, vol. 113, no. 70, MW2013-21, pp. 65-70, 2013年5月. |
資料番号 |
MW2013-21 |
発行日 |
2013-05-23 (MW) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
MW2013-21 エレソ技報アーカイブへのリンク:MW2013-21 |