| 講演抄録/キーワード |
| 講演名 |
2013-11-16 08:20
Contact corrosion of Ag-Mo electrical contact material ○Yusheng Cui・Yali Wang・Cao Ling・Lifu Hu(Metalor Technologies (Suzhou))・Christine Bourda(Metalor Technologies France)・Chi Leung(Metalor Technologies Americas) EMD2013-75 |
| 抄録 |
(和) |
Ag-Mo electrical contact material used in solenoid actuator showed high resistance during storage and with only a few switching cycles in service. Dark color erosion products were formed on contact surface causing high contact resistance. The failure contact was observed by SEM on surface and chemical contents of the dark area were checked by EDS. The results are compared with Ag-Mo material after oxidization at 500℃ and hydrogen sulfides corrosion at room temperature. Surface morphology observation and composition analysis suggested a mixture of Ag/S/O/C as well as Ag/Mo/O/C compounds were formed as high-resistance layer. |
| (英) |
Ag-Mo electrical contact material used in solenoid actuator showed high resistance during storage and with only a few switching cycles in service. Dark color erosion products were formed on contact surface causing high contact resistance. The failure contact was observed by SEM on surface and chemical contents of the dark area were checked by EDS. The results are compared with Ag-Mo material after oxidization at 500℃ and hydrogen sulfides corrosion at room temperature. Surface morphology observation and composition analysis suggested a mixture of Ag/S/O/C as well as Ag/Mo/O/C compounds were formed as high-resistance layer. |
| キーワード |
(和) |
Ag-Mo electrical contact material / corrosion / contact resistance / complex compounds / / / / |
| (英) |
Ag-Mo electrical contact material / corrosion / contact resistance / complex compounds / / / / |
| 文献情報 |
信学技報, vol. 113, no. 298, EMD2013-75, pp. 1-4, 2013年11月. |
| 資料番号 |
EMD2013-75 |
| 発行日 |
2013-11-09 (EMD) |
| ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
| PDFダウンロード |
EMD2013-75 |