講演抄録/キーワード |
講演名 |
2013-12-13 16:50
ソフトウェアプロトタイピングの仕様検討段階への導入効果 ○黒沼友恵・高橋 聖・中村英夫(日大)・池田岳雄・森 昌也・今村 覚(日本信号) DC2013-77 |
抄録 |
(和) |
システム開発にはプロトタイピングという手法がある。この手法は、最低限の機能や操作画面を実装した試作品(プロトタイプ)の作成を繰り返し行い、ユーザに確認してもらう。これをシステム開発初期のシステム発注側と開発側で共に行う要件定義段階で行うことで、要件の漏れや認識の食い違いを防げる。また、本来システムが完成した後でしか確認できないユーザインタフェースを初期に確認することもできる。この結果、最終段階での手戻りを防げるといった効果が認められている。これに対し本研究では、開発側に仕様を提案する前の仕様検討段階においてプロトタイピング手法を適用した場合の効果を検討した。 |
(英) |
The Prototyping model is a systems development method. A prototype mounting a minimum function and operation screen is built, tasted, and then reworked. If this prototyping is performed in the requirement definition stage, leaks and contradictions of requirements can be prevented. Moreover, the user interface which can be checked only after a system is completed can also be checked in early stages. As a result, the send back in the final stage can be prevented. This research examined the effect of applying the prototyping model to the specification examination stage before proposing specification to the development side. |
キーワード |
(和) |
プロトタイピング / システム開発 / 仕様検討 / ユーザインタフェース / / / / |
(英) |
Prototyping / Systems development / Specification examination / User interface / / / / |
文献情報 |
信学技報, vol. 113, no. 353, DC2013-77, pp. 51-54, 2013年12月. |
資料番号 |
DC2013-77 |
発行日 |
2013-12-06 (DC) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
DC2013-77 |
|