講演抄録/キーワード |
講演名 |
2014-02-28 09:20
溶融延伸型ファンアウト用光ファイバのMFD制御に関する検討 ○田中正俊・八若正義・藤巻洋介・谷口浩一(三菱電線) OFT2013-68 OPE2013-218 エレソ技報アーカイブへのリンク:OPE2013-218 |
抄録 |
(和) |
ファンアウト部品はマルチコア光ファイバ通信システムを構築する上で必要である。溶融延伸型ファンアウト部品は、複数のファンアウト用光ファイバのコア間隔を、マルチコア光ファイバのコア間隔に一致させる目的でテーパ状に溶融延伸加工される。しかし、テーパ部はクラッド径だけでなくコア径も変化する。溶融延伸部とマルチコア光ファイバの接続損失を抑えるためには、溶融延伸前後でファンアウト用光ファイバのモードフィールド径(MFD)に差が無いことが求められる。今回、溶融延伸前後でMFDの変化が小さく、マルチコア光ファイバとの接続損失が抑えられる溶融延伸型ファンアウト用の光ファイバを作製し、その特性を検証した。 |
(英) |
We investigated fused taper type fan-out devices for multicore fiber (MCF) transmission system. In the fused tapered type fan-out devices, the fan-out fibers were tapered down to small diameter to connect to the MCF. Mode field diameter (MFD) was changed by the tapering because of the change of the core diameter. The mismatch of MFD would cause the connection loss, thus the control of the MFD is important to realize the low loss connection. We fabricated the fan-out fiber which was designed to reduce the MFD change caused by the tapering. We measured the MFD before and after tapering and confirmed that MFD change was small in properly designed fiber. |
キーワード |
(和) |
ファンアウト部品 / マルチコア光ファイバ / MFD制御光ファイバ / / / / / |
(英) |
Fan-out device / Multi-core optical fiber / MFD controlled optical fiber / / / / / |
文献情報 |
信学技報, vol. 113, no. 447, OFT2013-68, pp. 71-76, 2014年2月. |
資料番号 |
OFT2013-68 |
発行日 |
2014-02-20 (OFT, OPE) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
OFT2013-68 OPE2013-218 エレソ技報アーカイブへのリンク:OPE2013-218 |