講演抄録/キーワード |
講演名 |
2014-03-04 11:00
結合導体に突起部を備えた低結合偏差ループ方向性結合器 ○石橋秀則・田原志浩・湯川秀憲(三菱電機)・栗原 学(菱電湘南エレクトロニクス)・大和田 哲・宮崎守泰(三菱電機) MW2013-199 エレソ技報アーカイブへのリンク: MW2013-199 |
抄録 |
(和) |
ループ方向性結合器は,主に導波管回路のパワーモニタとして使用される.本方向性結合器は,一般に主線路である導波管と,副線路である同軸線路を,結合孔を介して結合させる構造であり,結合孔の大きさは1/4波長よりも小さくなっている.このため,周波数が高くなるに従い結合度が高くなり,周波数帯域内での結合偏差が大きくなる.そこで筆者らは,結合導体に突起部を備えることにより,結合度の周波数変化を緩和し,結合偏差を低減する構造を提案した.本構造にてKu帯のループ方向性結合器を試作評価したところ,比帯域10%での結合偏差が2.1dBp-pから1.3dBp-pに改善されたことを示す. |
(英) |
The waveguide loop-type directional coupler is mainly used as power monitor of the waveguide circuits. It consists of a rectangular waveguide as a main line and a coaxial line as an auxiliary line. The coaxial line is coupled with the rectangular waveguide through a coupling hole which is smaller than quarter-wavelength. Therefore the waveguide loop-type directional coupler degrades the flatness of coupling response. The authors propose the waveguide loop-type directional couplers using a coupling conductor with protuberances in order to improve the coupling characteristics. In this report, we show the principle of improvement method and the measurement results. |
キーワード |
(和) |
方向性結合器 / 導波管 / 同軸線路 / 結合特性 / / / / |
(英) |
Directional coupler / Waveguide / Coaxial line / Coupling characteristic / / / / |
文献情報 |
信学技報, vol. 113, no. 460, MW2013-199, pp. 13-18, 2014年3月. |
資料番号 |
MW2013-199 |
発行日 |
2014-02-25 (MW) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
MW2013-199 エレソ技報アーカイブへのリンク: MW2013-199 |