講演抄録/キーワード |
講演名 |
2014-05-23 15:45
TEM共振金属ロッド共振器を有する60GHz帯反射型自己注入同期NRDガイドガン発振器の発振特性 ○寺本 慎・黒木太司(呉高専) MW2014-39 エレソ技報アーカイブへのリンク:MW2014-39 |
抄録 |
(和) |
従来の金属ロッド共振器を用いた60GHz帯反射型自己注入同期NRDガイドガン発振器は、金属ロッド伝送線路の第1高次モードを自己注入同期法に適用していた.しかし、第一高次モード共振金属ロッド共振器はその共振器長が60GHz帯において10mm程度と長く、発振器の小型化に問題があった.そこで本稿では60GHz帯発振器の低廉化及び小型化のため、TEM共振金属ロッド共振器を有する60GHz帯反射型自己注入同期NRDガイドガン発振器の検討を行う.最初に反射型発振器に用いる誘電体支持体を有するTEM共振金属ロッド共振器の固有値を電磁界シミュレータで計算し、60GHz近傍にて1900程度の高無負荷Qを有することを確かめた.最後に、TEM共振金属ロッドを有する反射型発振器の発振特性と位相雑音の計算を行い、安定した発振器が構成可能であることを確かめた. |
(英) |
In the former-fabricated reflection type of self-injection locked NRD guide Gunn oscillator with the metal rod resonator, the first higher order mode in the metal rod transmission line has been applied. However, the length of the first higher order mode type metal rod resonator was about 10mm at 60GHz, which is difficulty to miniaturize the oscillator. To realize the cost-effective and miniaturized oscillator at 60GHz, the reflection type of self-injection locked NRD guide Gunn oscillator with the TEM type metal rod resonator was examined in this paper. First, the eigenvalues of the TEM type metal rod resonator supported by the dielectric pieces were calculated, and it was verified that the TEM type metal rod resonator had the high un-loaded Q-factor of 1900. Finally, the oscillation characteristics on reflection type of oscillator loading the TEM type resonator and phase-noise were calculated. From the results, it was verified that the stably reflection type of oscillator can be composed. |
キーワード |
(和) |
金属ロッド共振器 / 自己注入同期 / ガン発振器 / NRDガイド / ミリ波 / / / |
(英) |
Metal rod resonator / Self-injection locking techniques / Gunn oscillator / NRD guide / Millimeter-waves / / / |
文献情報 |
信学技報, vol. 114, no. 45, MW2014-39, pp. 91-94, 2014年5月. |
資料番号 |
MW2014-39 |
発行日 |
2014-05-15 (MW) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
MW2014-39 エレソ技報アーカイブへのリンク:MW2014-39 |