講演抄録/キーワード |
講演名 |
2014-05-29 13:15
一層基板で構成された広帯域マイクロストリップ線路・クアッドリッジ導波管変換器 ○山田康太・榊原久二男・菊間信良(名工大)・荒川 孝・坂本 徹・武田政宗(マスプロ電工) AP2014-24 |
抄録 |
(和) |
一層基板で構成された,広帯域なマイクロストリップ線路・クアッドリッジ導波管(MS-QRWG)変換器を開発した.クアッドリッジホーンアンテナ(QRHA)を用いてモジュールを構成する場合に,アンテナと高周波回路を接続するMS-QRWG変換器が必要となる.変換器として誘電体基板上にクアッドリッジ導波管の領域を設ける際に,導波管領域の電気的な大きさを考慮しないと不整合が生じてしまう.そこで本報告では,誘電体基板上の導波管領域に新構造を導入することで広帯域に整合した変換器を実現できることを,有限要素法による電磁界解析,及び実験により示している.また,提案のMS-QRWG変換器を用いたQRHAを試作し,従来の同軸線路・クアッドリッジ導波管変換器を用いたQRHAとの比較を行った.その結果,従来構造と比べて提案構造のQRHAでは,アンテナの各ポートにおける反射量が等しい周波数特性を有することを明らかにした. |
(英) |
A broadband microstrip-to-quad ridged waveguide transition on a single layer is developed. In order to connect RF circuits directly with a quad ridged horn antenna, we added novel geometrical features in the printed pattern on the substrate. The proposed transition operates over a quite broad frequency bandwidth by changing the geometry of the printed pattern and controlling cutoff frequencies of the fundamental mode and higher order ones. The bandwidth 24.4 GHz (8.0:1) is obtained where the reflection level is lower than -10 dB. Furthermore, we have fabricated the quad ridged horn antenna with the proposed transition. As a result, it is also confirmed in the experiment and simulation that frequency characteristics of the reflection are almost equal at each port compared with those of the conventional coaxial-to-quad ridged waveguide. |
キーワード |
(和) |
クアッドリッジホーンアンテナ / リッジ導波管 / マイクロストリップ線路 / 変換器 / / / / |
(英) |
Quad-ridged horn antenna / Ridge waveguide / Microstrip / Transition / / / / |
文献情報 |
信学技報, vol. 114, no. 62, AP2014-24, pp. 29-34, 2014年5月. |
資料番号 |
AP2014-24 |
発行日 |
2014-05-22 (AP) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
AP2014-24 |