講演抄録/キーワード |
講演名 |
2014-05-30 10:25
ブリルアンゲインスペクトルモデルを用いた正弦的動ひずみの振幅と中心の計測 ○成瀬 央・早瀬義喜(三重大) OFT2014-12 |
抄録 |
(和) |
本報告では、ブリルアンゲインスペクトル(BGS)周波数シフトのひずみ依存性に基づく光ファイバひずみ計測システムを用いた、動ひずみの計測方法を提案している。高サンプリングレートでBGSを観測できるシステムが開発され、動ひずみがリアルタイムに計測されている。それに対して提案方法では計測対象の動ひずみを、BGS観測時間より十分短い周期で時間変化する高周波数の動ひずみとし、既存のシステムをそのまま用いてBGS観測時間内での動ひずみの情報を得る。本方法では動ひずみ下のBGS形状をモデル化し、このモデルを観測されたBGSにあてはめる。ここでは正弦的に時間変化する動ひずみを取り上げ、そのモデル化、最大ひずみを求めるのに必要となるひずみの振幅と中心の計測方法について述べる。また、シミュレーションによって計測誤差の特性を明らかにしてる。 |
(英) |
In this report, a method is presented for measuring dynamic strain using a fiber-optic strain sensing system that relies on the strain dependence of the Brillouin gain spectrum (BGS) frequency shift. By restricting the dynamic strain to be measured to that varying with a period sufficiently shorter than the BGS observation time, the BGS under the strain is modeled and the model is then fitted to the observed BGS. This BGS modeling allows for the measurement of dynamic strain with high frequency using a conventional system. With this method, although the dynamic strain is not measured in real time, information such as maximum strain during the BGS observation time can be obtained. In this report, the sinusoidally varying dynamic strain is obtained, and the method for measuring the amplitude and center of this dynamic strain, by which the maximum strain can be calculate, is described. In addition, the error characteristics of this measurement are clarified through simulations. |
キーワード |
(和) |
動ひずみ / 振幅 / 中心 / ブリルアンゲインスペクトル / モデル / 光ファイバセンシング / / |
(英) |
Dynamic strain / amplitude / center / Brillouin gain spectrum / model / fiber-optic sensing / / |
文献情報 |
信学技報, vol. 114, no. 64, OFT2014-12, pp. 57-60, 2014年5月. |
資料番号 |
OFT2014-12 |
発行日 |
2014-05-22 (OFT) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
OFT2014-12 |