講演抄録/キーワード |
講演名 |
2014-08-29 09:50
螺旋型光ケーブルの伝送特性に関する検討 ○五藤幸弘・深井千里・齊藤浩太郎・中島和秀・倉嶋利雄(NTT) OFT2014-17 |
抄録 |
(和) |
接続作業の簡易化を実現する手段として、光ケーブルの両端もしくは片端をあらかじめコネクタ化することが考えられる。しかし、コネクタ付きの光ケーブルでは長さ調整の自由度が低下するという問題が生じる。伸縮性のある螺旋構造を光ケーブルに適用することで、ある程度の長さ調整が可能になると考えられる。しかし、螺旋の構造寸法や伸縮に依存して光ファイバに曲げや歪みが発生し、伝送特性に影響を与える可能性がある。本検討では、螺旋構造を有する光ドロップケーブルを作製し、その伝送損失、並びに多光路干渉(MPI)特性について評価を行い、螺旋化に要求される構造条件、並びに螺旋型光ケーブルの適用条件について考察を行ったので報告する。 |
(英) |
An optical fiber cable with connector enables us to realize an easy optical wiring. However, the optical cable with pre-mounted connector makes it difficult to adjust its length in the field. It can be expected that an optical fiber cable with spiral structure allows us to control the wiring length. However, the spiral structure and its flexibility may degrade the transmission characteristics. In this study, we fabricated spiral optical drop cables and evaluated these transmission losses and multi-path interference (MPI) characteristics. We discussed about parameters required to the optical cable with spiral structure and its applicable conditions. |
キーワード |
(和) |
光ファイバ / 光ケーブル / 螺旋構造 / 曲げ損失 / MPI / / / |
(英) |
optical fiber / optical fiber cable / spiral structure / bending loss / MPI / / / |
文献情報 |
信学技報, vol. 114, no. 196, OFT2014-17, pp. 9-12, 2014年8月. |
資料番号 |
OFT2014-17 |
発行日 |
2014-08-21 (OFT) |
ISSN |
Print edition: ISSN 0913-5685 Online edition: ISSN 2432-6380 |
著作権に ついて |
技術研究報告に掲載された論文の著作権は電子情報通信学会に帰属します.(許諾番号:10GA0019/12GB0052/13GB0056/17GB0034/18GB0034) |
PDFダウンロード |
OFT2014-17 |